I have FreeBSD 8.2-RELEASE running on an HP DL360 G5. I recently added an (HP branded) LSI Logic single channel SCSI 320 card and attached an HP Ultrium 920 LTO3 tape drive.
The system sees the SCSI controller as mpt0, and it seems to know there's something at SCSI ID 4, but I get an "AutoSense Failed" for hba/id/lun 0:4:0 at boot and subsequent camcontrol rescans.
I checked the supported hardware doc for the release but it doesn't get very specific about tape drives. This is my first experience with LTO3 tape. I was hoping that I'd automagically get a /dev/sa0 device like I always did with my old DLT drives but it wasn't to be this time.
Is there a way to make this drive work? _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
