Must have overlooked in in my cut-and-paste job. Everything else appears to be intact.
# PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 There it is. Thanks again. Jason On Tue, 2003-04-01 at 13:17, Marcel Stangenberger wrote: > perhaps i'm overlooking it, but i don't see your network card in here? > > Regards, > > Marcel > > -- > Real programmers don't write in FORTRAN. FORTRAN is for pipe stress > freaks and crystallography weenies. FORTRAN is for wimp engineers who > wear white socks. > > On Tue, 1 Apr 2003, Jason Stewart wrote: > > > Here is my Kernel Config: > > > > Thanks again. > > Jason > > > > # > > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > > # > > # For more information on this file, please read the handbook section on > > # Kernel Configuration Files: > > # > > # > > http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html > > # > > # The handbook is also available locally in /usr/share/doc/handbook > > # if you've installed the doc distribution, otherwise always see the > > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > > # latest information. > > # > > # An exhaustive list of options and more detailed explanations of the > > # device lines is also present in the ./LINT configuration file. If you > > are > > # in doubt as to the purpose or necessity of a line, check first in > > LINT. > > # > > # $FreeBSD$ > > > > machine i386 > > cpu I686_CPU > > ident MIS3C > > maxusers 0 > > > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > > > options INET #InterNETworking > > options FFS #Berkeley Fast Filesystem > > options FFS_ROOT #FFS usable as root device [keep this!] > > options SOFTUPDATES #Enable FFS soft updates support > > options UFS_DIRHASH #Improve performance on big directories > > options MFS #Memory Filesystem > > options MD_ROOT #MD is a potential root device > > options NFS #Network Filesystem > > options NFS_ROOT #NFS usable as root device, NFS required > > options MSDOSFS #MSDOS Filesystem > > options CD9660 #ISO 9660 Filesystem > > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > > options PROCFS #Process filesystem > > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > > options UCONSOLE #Allow users to grab the console > > options USERCONFIG #boot -c editor > > options VISUAL_USERCONFIG #visual boot -c editor > > options KTRACE #ktrace(1) support > > options SYSVSHM #SYSV-style shared memory > > options SYSVMSG #SYSV-style message queues > > options SYSVSEM #SYSV-style semaphores > > options USER_LDT # Wine > > options > > P1003_1B #Posix P1003_1B real-time extensions > > options _KPOSIX_PRIORITY_SCHEDULING > > options ICMP_BANDLIM #Rate limit bad replies > > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > options AHC_REG_PRETTY_PRINT # Print register bitfields in debug > > # output. Adds ~128k to driver. > > options AHD_REG_PRETTY_PRINT # Print register bitfields in debug > > # output. Adds ~215k to driver. > > > > # Networking > > options IPX #IPX/SPX communications protocols > > options NCP #NetWare Core protocol > > > > # SMB/CIFS requester > > # NETSMB enables support for SMB protocol, it requires LIBMCHAIN and > > LIBICONV > > # options. > > # NETSMBCRYPTO enables support for encrypted passwords. > > options NETSMB #SMB/CIFS requester > > options NETSMBCRYPTO #encrypted password support for SMB > > options LIBMCHAIN #mbuf management library > > options LIBICONV > > options SMBFS > > > > device isa > > device pci > > > > # Sound Driver > > device pcm > > > > # Floppy drives > > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > > device fd0 at fdc0 drive 0 > > device fd1 at fdc0 drive 1 > > # > > # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, > > # don't use the above line for fdc0 but the following one: > > #device fdc0 > > > > # ATA and ATAPI devices > > device ata0 at isa? port IO_WD1 irq 14 > > device ata1 at isa? port IO_WD2 irq 15 > > device ata > > device atadisk # ATA disk drives > > device atapicd # ATAPI CDROM drives > > device atapifd # ATAPI floppy drives > > options ATA_STATIC_ID #Static device numbering > > > > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > > device atkbdc0 at isa? port IO_KBD > > device atkbd0 at atkbdc? irq 1 flags 0x1 > > device psm0 at atkbdc? irq 12 > > > > device vga0 at isa? > > > > # splash screen/screen saver > > pseudo-device splash > > > > # syscons is the default console driver, resembling an SCO console > > device sc0 at isa? flags 0x100 > > > > # Floating point support - do not disable. > > device npx0 at nexus? port IO_NPX irq 13 > > > > # Power management support (see LINT for more options) > > device apm0 at nexus? disable flags 0x20 # Advanced Power > > Management > > > > # PCCARD (PCMCIA) support > > device card > > device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > > device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > > > # Serial (COM) ports > > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > > device sio1 at isa? port IO_COM2 irq 3 > > device sio2 at isa? disable port IO_COM3 irq 5 > > device sio3 at isa? disable port IO_COM4 irq 9 > > > > # Parallel port > > device ppc0 at isa? irq 7 > > device ppbus # Parallel port bus (required) > > device lpt # Printer > > device ppi # Parallel port interface device > > > > > > # Pseudo devices - the number indicates how many units to allocate. > > pseudo-device loop # Network loopback > > pseudo-device ether # Ethernet support > > pseudo-device ppp 1 # Kernel PPP > > pseudo-device tun # Packet tunnel. > > pseudo-device pty # Pseudo-ttys (telnet etc) > > pseudo-device md # Memory "disks" > > pseudo-device gif # IPv6 and IPv4 tunneling > > > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > > # Be aware of the administrative consequences of enabling this! > > pseudo-device bpf #Berkeley packet filter > > > > # USB support > > device uhci # UHCI PCI->USB interface > > device ohci # OHCI PCI->USB interface > > device usb # USB Bus (required) > > device ugen # Generic > > device ukbd # Keyboard > > device ulpt # Printer > > device ums # Mouse > > device uscanner # Scanners > > > > > > > > On Tue, 2003-04-01 at 13:05, Marcel Stangenberger wrote: > > > > Questions: > > > > Did I break something when I made a new kernel? Why can smbfs not find a > > > > broadcast interface? > > > > > > > > > > can you provide your kernel configuration? > > > > > > Regards, > > > > > > Marcel > > > _______________________________________________ > > > [EMAIL PROTECTED] mailing list > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > > > > _______________________________________________ > > [EMAIL PROTECTED] mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
