You can use "fdisk -B" to install non-interactive boot manager. Or you can use -t in boot0cfg to make timeout equals to zero. If after it you STILL have "F1" -- you probably boot from another drive: not da0 but da1. How many drives do you have? Check your BIOS settings to find which drive you boot from.
Ilya. On Mon, Mar 21, 2011 at 3:48 PM, Michael Klapheke <mklap...@cedarpath.com>wrote: > Hi. I know this subject has been addressed in other posts, but I cannot > seem to get it to work. I have inherited a FreeBSD server and I cannot get > it to boot properly. I read the articles on avoiding having to press the F1 > key, and I tried to follow the suggestions (note, my disks are labeled > "da0s1" etc. instead of "ad0") as in the following: > > boot0cfg -B -b /boot/boot0 /dev/da0 > > or even > > fdisk -B -b /boot/boot0 /dev/da0 > > Neither of these prevents the user from having to press the F1 key. > > I also read the tutorial on how FreeBSD boots, but I cannot find anything > that helps. > > Any assistance is appreciated. > > Thanks > > Mike > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscr...@freebsd.org" > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
