Le Sat, 15 Jan 2011 18:57:33 -0500, Aryeh Friedman <[email protected]> a écrit :
> No idea how but when I plug the USB in it says "USB Debugging > Connected" On my HTC dream when I connect it to USB, there is a notification on the phone and I have (on the phone) to "unmount" the sd card. Then I can mount the sd card from FreeBSD with mount_msdosfs /dev/da0s1 /mnt dmesg: ugen2.2: <HTC> at usbus2 umass0: <HTC Android Phone, class 0/0, rev 1.02/1.00, addr 2> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:3:0:-1: Attached to scbus3 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present) da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <HTC Android Phone 0100> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. Regards. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
