Le Thu, 30 Sep 2010 21:10:59 +0200, Anselm Strauss <amsiba...@gmail.com> a écrit :
> Maybe sending it to just the USB list was too specific ... > > On 09/30/10 00:08, Anselm Strauss wrote: > > I have an ALIX board that has an AMD Geode and the CS5536 companion > > chip with integrated USB on it. When I connect a USB disk I have > > observed various problems. For example when I run fsck_ufs on a 250 > > GB partition the process gets stuck in biord state and fsck reports > > unreadable sectors. When I do a dd over the whole disk and direct > > it to /dev/null it suddenly returns with no error, but having read > > only a small fraction of the disk. I tried it with two different > > disks and two different ALIX boards. I'm pretty sure the disks are > > okay since I tried them on other hardware. > > > > As far as I know there was some trouble with the chip regarding > > timeouts. Under load after some time the USB just stops responding. > > I have tried 8.0 and 8.1. Is there any known problem? How can I > > track this down? I use a Soekris Net5501 (amd Geode and cs5536 chip) too since FreeBSD 6.X and I did not notice any problem with an usb disk (myne is a 160 go disk). It is my home "all-in-one box" doing backup and NAS (some times I make a backup on a usb drive) I follow the Soekris mailing list and I do not remembered anymone complaining about usb disk problems too. Regards. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
