On Tuesday 03 August 2010 12:33:04 David Allen wrote: > I recently upgraded a system from 8.0 to 8.1. > > I'm now trying to install FreeBSD 8.1 to a second system by performing a > minimal install, and then NFS mounting /usr/src and /usr/obj from the > just-upgraded system. > > Simple enough, right? Well, the installkernel target is bombing out with > an error each time. If I install from an 8.1 CD, I get 'ncp.ko not > found'. If I install from an 8.0 CD, I get the following: > > # cd /usr/src > # make installkernel > .... > ==> mxge (install) > ===> mxge/mxge (install) > install -o root -g wheel -m 555 if_mxge.ko /boot/kernel > ===> mxge/mxge_eth_z8e (install) > install -o root -g wheel -m 555 mxge_eth_z8e.ko /boot/kernel > ===> mxge/mxge_ethp_z8e (install) > install -o root -g wheel -m 555 mxge_ethp_z8e.ko /boot/kernel > ===> mxge/mxge_rss_eth_z8e (install) > install -o root -g wheel -m 555 mxge_rss_eth_z8e.ko /boot/kernel > ===> mxge/mxge_rss_ethp_z8e (install) > install -o root -g wheel -m 555 mxge_rss_ethp_z8e.ko /boot/kernel > ===> my (install) > install -o root -g wheel -m 555 if_my.ko /boot/kernel > ===> ncp (install) > install -o root -g wheel -m 555 ncp.ko /boot/kernel > *** Error code 71 > > Stop in /usr/src/sys/modules/ncp. > *** Error code 1 > > Stop in /usr/src/sys/modules. > *** Error code 1 > > Stop in /usr/obj/usr/src/sys/NOTGENERIC. > *** Error code 1 > > Stop in /usr/src. > *** Error code 1 > > Stop in /usr/src. > (END) > > There is no ncp.ko on the successfully upgraded system.
I suspect /etc/make.conf and/or /etc/src.conf are not identical on both machines. Probably you have WITHOUT_IPX only set on the build machine. - Pieter _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
