On Wed, Jun 30, 2010 at 1:49 AM, krad <kra...@googlemail.com> wrote:
>
>
> On 29 June 2010 07:20, Chris Maness <ch...@chrismaness.com> wrote:
>>
>> My named server used to resolve for external hosts. Recently I have
>> noticed that it no longer resolves names for resolvers not on the
>> local host. It works just fine for dig on the dns server itself. It
>> also works for domains that it has authority over. I also have it set
>> up to be a caching server on my network. Has the spec for the config
>> file changed or something?
>>
>> Here is the beginning of the the config file:
>>
>> cat named.conf
>> // $FreeBSD: src/etc/namedb/named.conf,v 1.26.2.2.2.1 2008/11/25
>> 02:59:29 kensmith Exp $
>> //
>> // Refer to the named.conf(5) and named(8) man pages, and the
>> documentation
>> // in /usr/share/doc/bind9 for more details.
>> //
>> // If you are going to set up an authoritative server, make sure you
>> // understand the hairy details of how DNS works. Even with
>> // simple mistakes, you can break connectivity for affected parties,
>> // or cause huge amounts of useless Internet traffic.
>>
>> options {
>> // Relative to the chroot directory, if any
>> directory "/etc/namedb";
>> pid-file "/var/run/named/pid";
>> dump-file "/var/dump/named_dump.db";
>> statistics-file "/var/stats/named.stats";
>> allow-transfer {
>> 76.238.148.146;
>> };
>>
>> // If named is being used only as a local resolver, this is a safe
>> default.
>> // For named to be accessible to the network, comment this option, specify
>> // the proper IP address, or delete this option.
>> // listen-on { 127.0.0.1; };
>>
>> // If you have IPv6 enabled on this system, uncomment this option for
>> // use as a local resolver. To give access to the network, specify
>> // an IPv6 address, or the keyword "any".
>> // listen-on-v6 { ::1; };
>>
>> // These zones are already covered by the empty zones listed below.
>> // If you remove the related empty zones below, comment these lines out.
>> disable-empty-zone "255.255.255.255.IN-ADDR.ARPA";
>> disable-empty-zone
>>
>> "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA";
>> disable-empty-zone
>>
>> "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA";
>>
>> // In addition to the "forwarders" clause, you can force your name
>> // server to never initiate queries of its own, but always ask its
>> // forwarders only, by enabling the following line:
>> //
>> // forward only;
>>
>> // If you've got a DNS server around at your upstream provider, enter
>> // its IP address here, and enable the line below. This will make you
>> // benefit from its cache, thus reduce overall DNS traffic in the
>> Internet.
>> /*
>> forwarders {
>> 127.0.0.1;
>> };
>> */
>> /*
>> Modern versions of BIND use a random UDP port for each outgoing
>> query by default in order to dramatically reduce the possibility
>> of cache poisoning. All users are strongly encouraged to
>> utilize
>> this feature, and to configure their firewalls to accommodate
>> it.
>>
>> AS A LAST RESORT in order to get around a restrictive firewall
>> policy you can try enabling the option below. Use of this
>> option
>> will significantly reduce your ability to withstand cache
>> poisoning
>> attacks, and should be avoided if at all possible.
>>
>> Replace NNNNN in the example with a number between 49160 and
>> 65530.
>> */
>> // query-source address * port NNNNN;
>> };
>>
>> // If you enable a local name server, don't forget to enter 127.0.0.1
>> // first in your /etc/resolv.conf so this server will be queried.
>> // Also, make sure to enable it in /etc/rc.conf.
>>
>> // The traditional root hints mechanism. Use this, OR the slave zones
>> below.
>> zone "." { type hint; file "named.root"; };
>>
>> /* Slaving the following zones from the root name servers has some
>> significant advantages:
>> 1. Faster local resolution for your users
>> 2. No spurious traffic will be sent from your network to the roots
>> 3. Greater resilience to any potential root server failure/DDoS
>>
>> On the other hand, this method requires more monitoring than the
>> hints file to be sure that an unexpected failure mode has not
>> incapacitated your server. Name servers that are serving a lot
>> of clients will benefit more from this approach than individual
>> hosts. Use with caution.
>>
>> To use this mechanism, uncomment the entries below, and comment
>> the hint zone above.
>> */
>> /*
>> zone "." {
>> type slave;
>> file "slave/root.slave";
>> masters {
>> 192.5.5.241; // F.ROOT-SERVERS.NET.
>> };
>> notify no;
>> };
>>
>> zone "0.0.127.IN-ADDR.ARPA" {
>> type master;
>> file "master/localhost.rev";
>> };
>> zone "in-addr.arpa" {
>> type slave;
>> file "slave/in-addr.arpa.slave";
>> masters {
>> 192.5.5.241; // F.ROOT-SERVERS.NET.
>> };
>> notify no;
>> };
>> */
>>
>> /* Serving the following zones locally will prevent any queries
>> for these zones leaving your network and going to the root
>> name servers. This has two significant advantages:
>> 1. Faster local resolution for your users
>> 2. No spurious traffic will be sent from your network to the roots
>> */
>> // RFC 1912
>> zone "127.in-addr.arpa" { type master; file "master/localhost-reverse.db";
>> };
>> zone "255.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // RFC 1912-style zone for IPv6 localhost address
>> zone "0.ip6.arpa" { type master; file "master/localhost-reverse.db";
>> };
>>
>> // "This" Network (RFCs 1912 and 3330)
>> zone "0.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // Private Use Networks (RFC 1918)
>> zone "10.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "16.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "17.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "18.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "19.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "20.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "21.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "22.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "23.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "24.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "25.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "26.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "27.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "28.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "29.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "30.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "31.172.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "168.192.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // Link-local/APIPA (RFCs 3330 and 3927)
>> zone "254.169.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // TEST-NET for Documentation (RFC 3330)
>> zone "2.0.192.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // Router Benchmark Testing (RFC 3330)
>> zone "18.198.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "19.198.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // IANA Reserved - Old Class E Space
>> zone "240.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "241.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "242.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "243.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "244.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "245.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "246.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "247.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "248.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "249.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "250.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "251.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "252.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "253.in-addr.arpa" { type master; file "master/empty.db"; };
>> zone "254.in-addr.arpa" { type master; file "master/empty.db"; };
>>
>> // IPv6 Unassigned Addresses (RFC 4291)
>> zone "1.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "3.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "4.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "5.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "6.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "7.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "8.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "9.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "a.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "b.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "c.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "d.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "e.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "0.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "1.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "2.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "3.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "4.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "5.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "6.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "7.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "8.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "9.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "a.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "b.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "0.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "1.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "2.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "3.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "4.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "5.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "6.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "7.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>>
>> // IPv6 ULA (RFC 4193)
>> zone "c.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "d.f.ip6.arpa" { type master; file "master/empty.db"; };
>>
>> // IPv6 Link Local (RFC 4291)
>> zone "8.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "9.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "a.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "b.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>>
>> // IPv6 Deprecated Site-Local Addresses (RFC 3879)
>> zone "c.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "d.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "e.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>> zone "f.e.f.ip6.arpa" { type master; file "master/empty.db"; };
>>
>> // IP6.INT is Deprecated (RFC 4159)
>> zone "ip6.int" { type master; file "master/empty.db"; };
>>
>> // NB: Do not use the IP addresses below, they are faked, and only
>> // serve demonstration/documentation purposes!
>> //
>> // Example slave zone config entries. It can be convenient to become
>> // a slave at least for the zone your own domain is in. Ask
>> // your network administrator for the IP address of the responsible
>> // master name server.
>> //
>> // Do not forget to include the reverse lookup zone!
>> // This is named after the first bytes of the IP address, in reverse
>> // order, with ".IN-ADDR.ARPA" appended, or ".IP6.ARPA" for IPv6.
>> //
>> // Before starting to set up a master zone, make sure you fully
>> // understand how DNS and BIND work. There are sometimes
>> // non-obvious pitfalls. Setting up a slave zone is usually simpler.
>> //
>> // NB: Don't blindly enable the examples below. :-) Use actual names
>> // and addresses instead.
>>
>> /* An example dynamic zone
>> key "exampleorgkey" {
>> algorithm hmac-md5;
>> secret "sf87HJqjkqh8ac87a02lla==";
>> };
>> zone "example.org" {
>> type master;
>> allow-update {
>> key "exampleorgkey";
>> };
>> file "dynamic/example.org";
>> };
>> */
>>
>> /* Example of a slave reverse zone
>> zone "1.168.192.in-addr.arpa" {
>> type slave;
>> file "slave/1.168.192.in-addr.arpa";
>> masters {
>> 192.168.1.1;
>> };
>> };
>> */
>>
>> zone "97.179.208.in-addr.arpa" IN {
>> type master;
>> file "master/reverse.zone";
>> allow-transfer { 76.238.148.146; 4.35.33.247; };
>> };
>>
>>
>> zone "localhost" IN {
>> type master;
>> file "localhost.zone";
>> allow-update { none; };
>> };
>>
>> zone "chrismaness.com" {
>> type master;
>> file "master/chrismaness.com";
>> // IP addresses of slave servers allowed to transfer
>> chrismaness.com
>> allow-transfer {
>> 76.238.148.146;
>> };
>>
>> };
>>
>> ###########
>>
>> Does anything look strange here? I also tried uncommenting the listen
>> on directive with the correct IP, and my server stopped resolving
>> names for hosts that it is authoritative for.
>>
>> Any help would be appreciated.
>>
>> Thanks,
>> Chris Maness
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscr...@freebsd.org"
>
>
> you may want to explictily set up a recursion acl on it. Look at these
> options below. The defaults may have changed when you did an upgrade
>
> allow-query { auth_hosts; };
> allow-recursion { auth_hosts; };
> allow-query-cache { auth_hosts; };
>
>
What is a recursion acl? Can I just add these lines to my config file
to set it up? Is the auth_hosts flag referring to a file with
authorized clients?
I did figure that something got nailed during mergemaster.
Thanks,
Chris Maness
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
