Morgan Wesström wrote: > Dear list. > > I have an USB smartcard reader that emulates a serial port. It uses the > uftdi.ko kernel module and creates the following device nodes when > plugged in. System is FreeBSD 7.2-RELEASE-p3 amd64. > > crw-rw---- 1 uucp dialer 0, 110 Jan 14 19:27 /dev/cuaU0 > crw-rw---- 1 uucp dialer 0, 111 Jan 7 14:01 /dev/cuaU0.init > crw-rw---- 1 uucp dialer 0, 112 Jan 7 14:01 /dev/cuaU0.lock > crw------- 1 root wheel 0, 107 Jan 14 19:25 /dev/ttyU0 > crw------- 1 root wheel 0, 108 Jan 7 14:01 /dev/ttyU0.init > crw------- 1 root wheel 0, 109 Jan 7 14:01 /dev/ttyU0.lock > > dmesg output: > > ucom0: <FTDI USB <-> Serial, class 0/0, rev 1.10/4.00, addr 2> on uhub5 > > I'm trying to access it with a linux program and the program initializes > and manages to read at least some basic info from the card but any > further communication with the card results in the following message > regardless of what device node I use: > > linux_sys_futex: unknown op 265 > > Same software and reader works on a pure linux machine. > > Does anyone have any hints on what I can do to try to track this problem > down? Some clarification on what the difference is between cuaU0 and > ttyU0 would be appreciated too and which of them I should use primarily.
Adding some more info myself here. Initially I only copied the shared libraries the program needed from my Linux computer and loaded the linux kernel module. Installing the full linux_base-f10 port seems to get rid of the error message so it seems unrelated to the actual communication problem I experience. The program initially detects the card in the reader but as soon as I try to communicate with it, the program thinks the reader is empty. Does anyone recognize this behaviour? /Morgan _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[email protected]"
