Yuri <y...@rawbw.com> wrote:
> I used -dao. Removing -dao. Removing -dao made my command line like this:
> cdrecord dev=5,0,0 speed=4 -raw96r -v -pad -useinfo -text *.wav
>
> And now it fails with this log:
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a62 (i386-unknown-freebsd7.2)
> Copyright (C) 1995-2009 J???rg Schilling
> TOC Type: 0 = CD-DA
> scsidev: '5,0,0'
> scsibus: 5 target: 0 lun: 0
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 65536
> atapi: 0
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'PIONEER '
> Identifikation : 'DVD-RW DVR-112D'
> Revision : '1.21'
...
> Track 10: audio 95 MB (09:27.22) no preemp pregapsize: 305
> Track 11: audio 27 MB (02:41.44) no preemp pregapsize: 332
> Total size: 586 MB (58:05.80) = 261435 sectors
> Lout start: 586 MB (58:07/60) = 261435 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Disk Is not unrestricted
> Disk Is not erasable
> Disk sub type: Medium Type B, low Beta category (B-) (4)
> ATIP start of lead in: -11834 (97:24/16)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 24
> Manufacturer: SONY Corporation
>
> Capacity Blklen/Sparesz. Format-type Type
> 0 2048 0x00 Unformated or Blank Media
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 98414
> Starting to write CD/DVD/BD at speed 4 in real RAW/RAW96R mode for
> single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is OFF.
> Performing OPC...
> cdrecord: WARNING: Drive returns wrong startsec (-150) using -11834 from
> ATIP
> Writing lead-in at sector -11834
> cdrecord: Input/output error. write_g1: scsi sendcmd: cmd timeout after
> 41.429 (40) s
> CDB: 2A 00 FF FF D4 02 00 00 1A 00
> cmd finished after 41.429s timeout 40s
> write leadin data: error after 1400256 bytes
> cdrecord: Could not write Lead-in.
> Writing time: 56.827s
> cdrecord: fifo had 64 puts and 0 gets.
> cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
What error message did cdrecord print?
Jörg
--
EMail:jo...@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
j...@cs.tu-berlin.de (uni)
joerg.schill...@fokus.fraunhofer.de (work) Blog:
http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
