On Sáb Jun 6 14:42 , Wojciech Puch= ar sent:
> When the TL= -C300 is plugged in after boot, it produces the
following console report:-<= /span>
>
> umass1: on uh= ub2
> (probe0:umass-sim1:1:0:0): TEST UNIT READY= . CDB: 0 0 0 0 0 0
> (probe0:umass-sim1:1:0:0): CAM Status: SCS= I Status Error
> (probe0:umass-sim1:1:0:0): SCSI Status: Ch= eck Condition
> (probe0:umass-sim1:1:0:0): NOT READY asc:3= a,0
> (probe0:umass-sim1:1:0:0): Medium not pres= ent
> (probe0:umass-sim1:1:0:0): Unretryable err= or
> da0 at umass-sim1 bus 1 target 0 lun 0
> da0: Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 1900MB (3892224 512 byte sectors: 255= H 63S/T 242C)
>
doesn't look like too big blocksize problem...
> but fails to create /dev/da0. Also, when i= t is plugged in, no
other usb devices are recognised.
>
> Unplugging produces this:-
>
> umass1: at uhub2 port 2 (addr 2) disconnec= ted
> (da0:umass-sim1:1:0:0): Synchronize cache = failed, status ==
0x39, scsi status == 0x0
> (da0:umass-sim1:1:0:0): lost device > (da0:umass-sim1:1:0:0):
removing device en= try
> umass1: detached
If it's "Synchronize cache failed" problem, then adding entry in
umass.c will fix it, as with my olympus FE-20
But it's rather not main problem. maybe some other quirk?
look at possible quirks
Many thanks for putting me on the right track.
I played around with the quirks and found that it needs both these
to creat= e the
device and make it mountable:-
NO_TEST_UNIT_READY | NO_SYNCHRONIZE_CACHE
Works fine now
Thanks
_________________________________________________________________
Ãrea de Clientes Clix â Toda a gestão dos seus
serviÃ= §os online!
http://cliente.clix.pt/. _______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
