em0: <Intel PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem
0xfc220000-0xfc23ffff,0xfc200000-0xfc21ffff irq 31 at device 4.0 on pci3
em0: [FILTER]
em0: Ethernet address: 00:30:48:24:84:f2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem
0xfc321000-0xfc321fff,0xfc300000-0xfc31ffff irq 17 at device 2.0 on pci4
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:24:84:f3
fxp0: [ITHREAD]
I have tried both 7.1 and 7.2 So is the information on the board wrong
or is there something I am missing.
If that board would be really 2*1000Mbps, for sure producer would use 2
the same chips. Then - it's impossible that FreeBSD would detect one chip
properly and other - the same - improperly.
It's just wrong info.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
