On Saturday 07 February 2009 18:58:40 you wrote: > David Naylor wrote: > >> Can you see problems of your wireless card in /var/log/messages? > > > > I do get some errors, here is a sample: > > # grep ndis0 /var/log/messages > > Feb 7 17:57:55 dgserver kernel: arp: 192.168.0.2 is on rl0 but got reply > > from 00:02:6f:3e:8a:ed on ndis0 > > Feb 7 18:03:25 dgserver kernel: arp: 192.168.0.1 is on lo0 but got reply > > from 00:02:6f:3e:8a:ed on ndis0 > > > > The MAC address is not an my network, as far as I can see. > > Can you give me a "netstat -nr" and a ifconfig?
dgserver# netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.193.194.1 UGS 0 830 ndis0
127.0.0.1 127.0.0.1 UH 0 254 lo0
192.168.0.0/24 link#2 UC 0 0 rl0
192.168.0.2 7e:2b:34:e8:eb:a2 UHLW 1 2 rl0 618
192.168.0.3 00:a1:b0:a0:63:68 UHLW 1 504 rl0 1129
192.168.0.6 00:1d:72:1d:63:41 UHLW 1 1734 rl0 35
192.168.0.255 ff:ff:ff:ff:ff:ff UHLWb 1 109 rl0
192.193.194.0/24 link#1 UC 0 0 ndis0
192.193.194.1 00:02:6f:47:92:29 UHLW 2 1941 ndis0 1199
Internet6:
(removed, not used)
dgserver# ifconfig
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:11:95:16:59:5d
inet 192.193.194.58 netmask 0xffffff00 broadcast 192.193.194.255
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid QuickNet channel 1 (2412 Mhz 11b) bssid 00:02:6f:3e:13:cf
authmode OPEN privacy OFF bmiss 7 scanvalid 60
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:13:f7:cb:2f:b9
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
dgserver# dmesg | grep 'rl0'
rl0: <RealTek 8139 10/100BaseTX> port 0xf800-0xf8ff mem 0xfdffc000-0xfdffc0ff
irq 11 at device 14.0 on pci0
miibus0: <MII bus> on rl0
dgserver# dmesg | grep 'ndis0'
ndis0: <D-Link AirPlus G+ DWL-G520+ Wireless PCI Adapter> mem
0xfdffa000-0xfdffbfff,0xfdfc0000-0xfdfdffff irq 15 at device 13.0 on pci0
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
ndis0: WARNING: using obsoleted if_watchdog interface
ndis0: Ethernet address: 00:11:95:16:59:5d
ndis0: link state changed to UP
(and both commands above have a common):
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
arp: 192.168.0.2 is on rl0 but got reply from 00:02:6f:3e:8a:ed on ndis0
signature.asc
Description: This is a digitally signed message part.
