On Wed, 2008-08-27 at 10:43 +0200, Wojciech Puchar wrote:
> >>
> >> what i do wrong?
> >>
> > Have you checked flag setting on sio?
> >
> > # dmesg | grep "sio.*flags"
> > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
> > on acpi0
>
> yes. i then tried to change flags to 0x20 (force console) - still doesn't
> work
>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x20 on acpi0
> sio0: type 16450
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
>
Careful, note the last sentence in the 0x20 flag description:
0x20
Forces this unit to be the console (unless there is
another higher priority console), regardless of the -h
option discussed below. The flag 0x20 must be used
together with the 0x10 flag.
i.e. to use 0x20 you have to set it to 0x30
>
>
> it is qemu "machine" for now, but just to test, i would like to use it on
> real hardware.
>
Never tried, could be a qemu-specific issue?
Wayne
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
