Στις Tuesday 22 July 2008 10:16:02 ο/η Manolis Kiagias έγραψε: > Achilleas Mantzios wrote: > > Στις Tuesday 22 July 2008 00:25:46 ο/η Tore Lund έγραψε: > > > >> Achilleas Mantzios wrote: > >> > >>> ... > >>> Having said that, the issue with the temperature must not be my thing :( > >>> after kldload coretemp, i get > >>> [EMAIL PROTECTED] ~]% sysctl -a | grep tempera > >>> hw.acpi.thermal.tz0.temperature: 40,0C > >>> dev.cpu.0.temperature: -1 > >>> [EMAIL PROTECTED] ~]% > >>> The first always is stuck to 40 and dev.cpu.0.temperature to -1. > >>> > >> Achillea, have you told us what CPU you have? Manolis presumes you have > >> an Intel, but I do not see this information anywhere in your posts. If > >> you have a recent AMD, try the port k8temp. > >> > > > > Sorry, i have a > > CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2672.74-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x4400<CNXT-ID,xTPR> > > So coretemp is not for me. > > > > Definitely. > > > While experimenting, i noticed the 1st and 3rd temperatures from mbmon to > > be updated in a fashion that seems > > natural. > > [EMAIL PROTECTED] ~]% mbmon > > Temp.= 41.0, 201.0, 42.0; Rot.= 3443, 0, 0 > > Vcore = 1.50, 1.81; Volt. = 3.30, 5.08, 11.43, -11.74, -1.69 > > > > What chipset is the mobo based on? mbmon runs fine on my 865G and a 3Ghz > P4 CPU. You are probably correct, the middle temp may represent a sensor > that is not recognized, but the other readings seem normal. >
i'll let you know next time i open the case. Is there any reading from dmesg or sysctl that can reveal that info? > > I started to trust mbmon, and i think the 1st temp must be motherboard, > > while the 3rd CPU, > > and indeed the first value varies betaeen 41-42 degrees, and the third > > value from 39, (~ 100% idle) > > to 45 (0% idle). So i assume the above must be right. > > Yesterday i had mbmon -t > mbmon.out running all night and the highest CPU > > temp was at 46 deg C, > > while highest MB temp was at 43 deg Celsius (if the previous assumptions > > about the interpretation of the > > output of mbmon are correct). > > Both high temps happened while running periodic daily at 03:00 (which > > increased my trust in those). > > All that, was after i blew the box/case inside and closed the case. > > If i trust those numbers and their interpretation then i must not have a > > temperature problem (anymore). > > Lets see how the machine behaves. > > There is always the other usual suspect from the memory department :) > > > > > > > For memory, I would suggest memtest86. For stressing the machine, try > math/mprime in torture mode. Watch the temperatures and make sure you > leave it running for a couple of hours and you don't get any errors. > Usually, if you have a termperature problem it will bail out in half an > hour or less. > Memtest86 is good enough, i have used it on other machines. Thx for the math/mprime hint. > -- Achilleas Mantzios _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
