On Jul 13, 2008, at 4:38 AM, Aggelidis Nikos wrote:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 9 minutes - 1 errors, 0 warnings.
so maybe it isn't even a psu problem but a cpu one?
If it was strictly a problem with the CPU, you'd likely not be able to
boot, or this test would fail within a few seconds.
9 minutes is possible but a bit on the early side to be a thermal
issue; more likely would be the memory config and BIOS setup is
marginal and that relaxing the timings would help. If you shut down
for a while, and then do a cold restart with the case open, does that
result in the stress test taking longer to fail?
If so, check your cooling.
On the other hand, if the length of time before failure doesn't
change, or more precisely seems random-- 5-10 minutes one try, an hour
the next, that generally indicates memory and motherboard BIOS setup.
PSU problems tend to not show up with prime95, but when you have the
disks busy and maybe graphics, also.
--
-Chuck
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
