Le 15/05/08 à 18:02, Mike Ginsburg téléscripta : > A question to all of your xorg experts. > > I'm running FreeBSD 6.2-RELEASE-p8 with xorg-7.3.1. Up until today I was > running on an PCIe RV280 (9200 Pro) with a dvi splitter to give me 2 > monitors. > > Today I added a 2nd PCI card (Radeon 9260) over VGA. For the life of me I > can't seem to configure my xorg.conf to work with the 2nd card and 3rd > monitor. I have attached a tarball with my working xorg.conf, and my > attempts at configuring the 2nd card (xorg.conf.broken). > > Any and all help is appreciated. If you need more information, please feel > free to ask and I'll provide it. Thank you.
Hello,
Here is the revelant parts of the configuration I was using with a PCI-E
Nvidia card for two monitors (DVI+VGA) and a PCI ATI card for the third
monitor:
--------------------8<---------------------------------------------------------
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" LeftOf "Screen0"
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "ServerFlags"
Option "Xinerama" "1"
EndSection
Section "Monitor"
Identifier "FP202W 0"
VendorName "Unknown"
ModelName "BenQ FP202W"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "FP202W 1"
VendorName "Unknown"
ModelName "BenQ FP202W"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "SyncMaster 730BF"
HorizSync 30-81
VertRefresh 60
Option "DPMS"
EndSection
Section "Device"
Identifier "7300 0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusId "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "7300 1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GS"
BusId "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Driver "ati"
Identifier "ATI RageXL"
BusId "PCI:6:17:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "7300 0"
Monitor "FP202W 0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "7300 1"
Monitor "FP202W 1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1680x1050" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "ATI RageXL"
Monitor "SyncMaster 730BF"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
--------------------8<---------------------------------------------------------
I'm not sure, but you could probably do something like this with your two ATI
cards.
HTH,
Baptiste
--
Baptiste Grenier | PGP: 0x069112E2
HealthGrid SysAdmin
http://healthgrid.org/
pgpVyRLUtU26i.pgp
Description: PGP signature
