$ pkg_info | grep nut
nut-2.2.1_1 Network UPS Tools
$ grep driver /usr/local/etc/nut/*.conf | grep -v \#
/usr/local/etc/nut/ups.conf: driver = usbhid-ups
$ grep Ellipse /usr/local/etc/nut/driver.list | grep 750 | grep usb
"MGE Office Protection Systems" "Ellipse ASR USBS 600/750/1000/1500 VA"
"USB cable" "usbhid-ups"
"MGE UPS SYSTEMS" "Ellipse Office 750" "USB" "usbhid-ups"
$ sudo /usr/local/etc/rc.d/nut start
Network UPS Tools - UPS driver controller 2.2.1
Network UPS Tools: 0.29 USB communication driver - core 0.32 (2.2.1)
Using subdriver: MGE HID 1.01
Starting nut.
Network UPS Tools upsd 2.2.1
listening on 0.0.0.0 port 3493
Connected to UPS [ellipse]: usbhid-ups-ellipse
Broadcast Message from [EMAIL PROTECTED]
(no tty) at 7:34 CEST...
Communications with UPS [EMAIL PROTECTED] established
It seems to be the good driver.
It seems to be the last nut version.
It seems to run weel during about 1/2 day, and then crash :/
Olivier
________________________________________
De : Derek Ragona [mailto:[EMAIL PROTECTED]
Envoyé : jeudi 1 mai 2008 20:14
À : Olivier GARNIER; [email protected]
Objet : Re: Nut problem and last message repeated in dmesg
Make sure you are using the correct driver. Nut has consolidated and
changed drivers in recent releases.
-Derek
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
