Hi
I have a FreeBSD7 firewall and its working like a dream well so far. This
is my setup
rl0 -> wan1
rl1 -> wan2
re0 -> lan
ath0 -> wlan
I have a bridge set up on re0 and ath0 to get bridge0, here is my ifconfig
ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 2290
ether 00:0b:6b:0b:62:c8
media: IEEE 802.11 Wireless Ethernet autoselect <hostap>
(autoselect <hostap>)
status: associated
ssid something channel 2 (2417 Mhz 11g) bssid 00:0b:6b:0b:62:c8
authmode WPA privacy MIXED deftxkey 2 TKIP 2:128-bit TKIP 3:128-bit
txpower 31.5 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
roam:rssi11g 7 roam:rate11g 5 protmode CTS burst dtimperiod 1
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:04:a7:09:81:80
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:04:a7:09:81:7f
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=98<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 00:04:a7:05:88:c0
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu
1500
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33204
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 92:52:90:af:3f:07
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
member: ath0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0
mtu 1485
inet 111.222.333.444 --> 112.221.331.441 netmask 0xffffffff
ng1: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0
mtu 1485
inet 22.333.444.555 --> 121.212.313.414 netmask 0xffffffff
The bridge is working in that both lan and wlan can access the internet
perfectly well but the problem lies with accessing each other.
I can't connect to any of the servers running in lan from wlan.
Any help would be appreciated
Regards
Reinhold
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
