At 04:08 AM 4/8/2008, Johannes-Maria Kaltenbach wrote:
Hello,
at the moment I'm using internet an emails via a 56k modem and ppp.
I want to change to DSL -- but I'm not able to do it without help.
I've bought a router/gateway from my provider (Telekom/T-Online)
which is called "Speedport W 502V Typ A" an has the ip address
192.168.2.1; it is connectet to an ethernet card (rl0).
The provider requests DHCP, but this doesn't work; I get the message
| Bogus domain search list 15: Speedport_W_502V_Typ_A (Speedport_W_502V_Typ_A)
| Invalid lease option - ignoring offer
several times and the error message "Network is unreachable".
Then I assigned an address (e. g. 192.168.10.1) to the ethernet card
with the help of
ifconfig rl0 192.168.10.1 255.255.255.0
You need to setup your IP on the same subnet as your router, Check the
documentation on your router and choose an address NOT given as a DHCP
address.
Many routers start their DHCP pool at 100, so you could try:
ifconfig rl0 192.168.2.10 255.255.255.0
Then:
route add default 192.168.2.1
This would work as long as the 192.168.2.10 is outside the DHCP pool.
-Derek
and made it the default route:
route add default 192.168.10.1
output of ifconfig:
| rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
| options=8<VLAN_MTU>
| inet 192.168.10.1 netmask 0xffffff00 broadcast 255.255.255.0
| inet6 fe80::214:85ff:fe75:eac8%rl0 prefixlen 64 scopeid 0x1
| ether 00:14:85:75:ea:c8
| media: Ethernet autoselect (100baseTX <full-duplex>)
| status: active
and netstat:
| Routing tables
|
| Internet:
| Destination Gateway Flags Refs Use Netif Expire
| default 192.168.10.1 UGS 0 2304 rl0
| localhost localhost UH 0 490 lo0
| 192.168.10 link#1 UC 0 0 rl0
| 192.168.10.1 00:14:85:75:ea:c8 UHLW 2 36 lo0
I cannot "ping" the router/gateway:
| PING 192.168.2.1 (192.168.2.1): 56 data bytes
| 36 bytes from 192.168.10.1: Time to live exceeded
| Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
| 4 5 00 5400 025f 0 0000 01 01 29f8 192.168.10.1 192.168.2.1
|
| 36 bytes from 192.168.10.1: Time to live exceeded
| Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
| 4 5 00 5400 0269 0 0000 01 01 29ee 192.168.10.1 192.168.2.1
|
| 36 bytes from 192.168.10.1: Time to live exceeded
| Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
| 4 5 00 5400 0273 0 0000 01 01 29e4 192.168.10.1 192.168.2.1
etc.
With "firefox http://192.168.2.1"; (to get the configuration menu of
the speedport) I get the error message:
| The connection was refused when attempting to contact 192.168.2.1.
and with telnet:
| Trying 192.168.2.1...
| telnet: connect to address 192.168.2.1: No route to host
| telnet: Unable to connect to remote host
What I'm doing wrong?
Can you please help me?
Thanks,
Johannes-Maria
P. S.: I'm using FreeBSD 6.0-RELEASE. (That's the only operating
system on my pc, so I cannot test or configure the speedport with
Linux or MS-Windows.)
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
