On Tuesday 18 March 2008 14:28:22 Jon Theil Nielsen wrote: > My goal is to make our PDC (FreeBSD 7.0 - Samba 3.0.28) available > through VPN from Windows clients so clients can authenticate via > Winbind, join the domain and access there home shares. > I have tried to follow the instructions by Andrew Bartlett ( > http://samba.org/ftp/unpacked/lorikeet/pppd/final-report.pdf) - without > success. > > My main configuration file /usr/local/etc/httpd.conf looks like > option /etc/ppp/options.pptp > localip 192.168.1.4 > remoteip 192.168.1.150-155 > pidfile /var/run/pptpd.pid > # TAG: bcrelay <if> > bcrelay eth0 > > And the /etc/ppp/options.pptp: > lock > noauth > nobsdcomp > lcp-echo-failure 10 > lcp-echo-interval 10 > > I have another file /etc/ppp/options: > lock > noauth > nobsdcomp > lcp-echo-failure 10 > lcp-echo-interval 10 > mflserver3# less /etc/ppp/options > name mflserver3 > noipdefault > noauth > lock > local > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > proxyarp > ms-dns 192.168.1.4 > ms-wins 192.168.1.4 > refuse-chap > refuse-mschap > > Finally, I have both pap-secrets and chap-secrets. > > With the existence of a /etc/ppp/ppp.conf looking like: > pptp: > set timeout 0 > set log phase chat connect lcp ipcp command > set dial > set login > enable mssfixup > set ifaddr 192.168.1.4 192.168.150-192.168.1.155 255.255.255.0 > set server /tmp/loop "" 0177 > disable pap > # Authenticate against /etc/passwd > enable passwdauth > disable ipv6cp > enable proxy > accept dns > enable MSChapV2 > enable mppe > disable deflate pred1 > deny deflate pred1 > set dns 195.184.96.2 > set device !/etc/ppp/secure > > I got the following in my log: > ppp[67205]: Warning: Label /etc/ppp/options.pptp rejected -direct > connection: Configuration label not found > > When I removed ppp.conf, I got: > ppp[67267]: Warning: Label /etc/ppp/options.pptp rejected -direct > connection: /etc/ppp/ppp.conf : File not found > > I am a bit confused. It seems that the reference to the options file > makes something go wrong. And it seems that pptpd needs the ppp > configuration file to work.
Yes, this configuration guide you've read is for Linux, thus it will use pppd by Paul Mackeras. pppd is in the base system(/usr/sbin/pppd), but it's an older version than the Linux one, since most people on FreeBSD use user-ppp(/usr/sbin/ppp). So, bad news first: pppd probably won't work(at least won't work by copying a configuration file you've found on the internet). I have many doubts that FreeBSD's pppd can be used with pptp. The good news are, that poptop is supported(it's in the ports), you just have to use user-ppp(which you seem to already use, since the name of the process above is ppp). Isn't the pptp entry on /etc/ppp/ppp.conf, installed from the port??? Did you search the package for configuration samples? > > Does anyone have a working example of poptop-based vpn server The pptp server/client of preference for a FreeBSD system, is in my humble opinion net/mpd. I suggest you to use that. There many guides on "pptp and mpd" lying around on the net. HTH, Nikos _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
