[Error messages removed] Short answer: No. Long answer: Copying error messages, logfile and related information into a mail can only be a supplement to a proper problem description. It's evident that you obviously have some kind of hardware problem. But nobody here on this list can tell what hardware you're using, e.g. - mainboard - CPU - the card in question (as much as possible, including possible chip revisions, bus type etc.) - What devices are connected to the card (as it appears to be a SCSI HBA).
The the question is, what software you're using. - What FreeBSD Version (6.0, 6.1, 6.2, latest Patchlevel, 7.0_PRERELEASE...) - Information about your kernel: Is it GENERIC, or did you compile your own? - Are you using i386 or arm64? And finally: - What did you try to resolve this issue? - Did you rule out any hardware related issue, e.g. a broken cable, a connector not being in place properly. Did you try another slot? - Oh yes: When does this error show up? During the initialization of the card? Or when you try to access one of the attached devices? _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
