I forgot to tell you assuming that you will do it your self
Just add
link acd0 cd0
but you have to use cd0.
Pedja
Crist J. Clark wrote:
On Thu, Sep 13, 2007 at 01:21:09PM -0700, Predrag Punosevac wrote:
Make sure you add atapicam into your kernel it is not in generic! I had
the same problem.
/etc/loader.conf atapicam_load="YES"
I did a,
# kldload /boot/kernel/atapicam.ko
And to reinitiallize the drive,
# atacontrol detach ata1
# atacontrol attach ata1
I got the same console message,
acd0: detached
(cd0:ata1:0:0:0): lost device
(cd0:ata1:0:0:0): removing device entry
atapicam1: detached
stray irq15
acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33
And still get,
# burncd -f /dev/acd0 -t -s 32 data ~cjc/hw.iso fixate
burncd: ioctl(CDIOCSTART): Input/output error
Crist J. Clark wrote:
I just tried to burn a CD for the first time in a long time
on a machine. The burncd(8) command worked fine on this machine
in FreeBSD 5.x (or was it 4.x?), but now in 6.2, I get,
# burncd -f /dev/acd0 -s 32 data hw.iso fixate
burncd: ioctl(CDIOCSTART): Input/output error
Looking at the dmesg(1) from the last boot,
# fgrep cd0 /var/run/dmesg.boot
acd0: CDROM <CRD-8400B/1.06> at ata1-master UDMA33
Makes me think the system is not recognizing the device as CDRW,
only CDROM. I get this from atacontrol(8),
# atacontrol info ata1
Master: acd0 <CRD-8400B/1.06> ATA/ATAPI revision 0
Slave: no device present
# atacontrol cap acd0
Protocol ATA/ATAPI revision 0
device model CRD-8400B
serial number 1999/10/12
firmware revision 1.06
cylinders 0
heads 0
sectors/track 0
lba supported
lba48 not supported
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache no no
read ahead no no
Tagged Command Queuing (TCQ) no no 0/0x00
SMART no no
microcode download no no
security no no
power management no no
advanced power management no no 0/0x00
automatic acoustic management no no 0/0x00 0/0x00
How can I restore burning capability?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
