Same driver different hw, same os version...
blackguy# cat /etc/sysctl.conf
security.bsd.see_other_uids=0
net.link.ether.inet.log_arp_wrong_iface=0
net.inet6.ip6.v6only=0
kern.ipc.shmall=32768
kern.ipc.shmmax=67108864
vfs.usermount=1
FreeBSD blackguy.unixtechs.org 6.2-STABLE FreeBSD 6.2-STABLE #22: Mon
Aug 13 23:00:44 EDT 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BLACKGUY i386
blackguy# dmesg
~
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #22: Mon Aug 13 23:00:44 EDT 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BLACKGUY
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 3000+ (2162.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 3221159936 (3071 MB)
avail memory = 3142520832 (2996 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
Correcting nForce2 C1 CPU disconnect hangs
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe8001000-0xe8001fff irq 11
at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe8002000-0xe8002fff irq 4
at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xe8003000-0xe80030ff
irq 3 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xe000-0xe007 mem
0xe8000000-0xe8000fff irq 10 at device 4.0 on pci0
nve0: Ethernet address 00:11:2f:b5:c2:41
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:11:2f:b5:c2:41
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xe7010000-0xe70100ff irq 11 at device 7.0 on pci1
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:ba:44:04:89
ath0: <Atheros 5212> mem 0xe7000000-0xe700ffff irq 5 at device 8.0 on
pci1
ath0: Ethernet address: 00:12:17:6c:5f:0d
ath0: mac 5.9 phy 4.3 radio 3.6
pcm0: <Creative CT5880-C> port 0xd400-0xd43f irq 7 at device 9.0 on
pci1
pcm0: <TriTech TR28602 AC97 Codec>
pcm0: <Playback: DAC2 / Record: ADC>
atapci0: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <Unknown> mem
0xe4000000-0xe4ffffff,0xd0000000-0xdfffffff,0xe5000000-0xe5ffffff irq
11 at device 0.0 on pci2
nvidia0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: Kensington Kensington Expert Mouse, rev 1.10/1.00, addr 2, iclass
3/1
ums0: 4 buttons and Z dir.
ukbd0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73,
addr 3, iclass 3/1
kbd1 at ukbd0
uhid0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73,
addr 3, iclass 3/1
Timecounter "TSC" frequency 2162742160 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 194481MB <Maxtor 6L200R0 BAH41E00> at ata0-master UDMA133
ad1: 286188MB <Maxtor 6B300R0 BAH41B10> at ata0-slave UDMA133
ad2: 114473MB <WDC WD1200BB-00CAA1 17.07W17> at ata1-master UDMA100
acd0: DVDR <PLEXTOR DVDR PX-716A/1.04> at ata1-slave UDMA66
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /backup was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /mp3 was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
WARNING: /prod was not properly dismounted
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata1 bus 0 target 1 lun 0
cd0: <PLEXTOR DVDR PX-716A 1.04> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
blackguy# cat /etc/X11/xorg.conf
~
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 ([EMAIL PROTECTED]) Sat Nov
# 4 19:30:36 EST 2006
##Section "DRI"
# Group 0
# #Group 438
# Mode 0666
#EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen 0" 0 0
Screen "Screen 1" LeftOf "Screen 0"
InputDevice "Microsoft_Natural" "CoreKeyboard"
InputDevice "Microsoft Intellimouse Explorer" "CorePointer"
Option "Xinerama" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/freefont"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
EndSection
Section "Module"
# Load "dri"
Load "glx"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the
DGA extension
EndSubSection
EndSection
Section "ServerFlags"
Option "allowmouseopenfail"
Option "NoPM"
Option "TvOut" "off"
EndSection
Section "InputDevice"
Identifier "Microsoft_Natural"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Microsoft Intellimouse Explorer"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "1600"
Option "CursorShadow" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
#DisplaySize 1600 1200
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
EndSection
Section "Device"
Identifier "GeForce 6600GT_0"
Driver "nvidia"
VendorName "Matrox Graphics, Inc."
BusID "PCI:2:0:0"
Screen 0
EndSection
Section "Device"
Identifier "GeForce 6600GT_1"
Driver "nvidia"
VendorName "Matrox Graphics, Inc."
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen 0"
Device "GeForce 6600GT_0"
Monitor "monitor0"
DefaultDepth 24
DefaultFbBPP 32
Option "HWcursor" "off"
Option "DPMS" "on"
Option "DigitalScreen1" "on"
Option "Busmastering" "on"
Option "XFB" "on"
Option "AddARGBGLXVisuals" "on"
Option "Composite" "on"
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "GeForce 6600GT_1"
Monitor "monitor1"
DefaultDepth 24
DefaultFbBPP 32
Option "HWcursor" "off"
Option "DPMS" "on"
Option "DigitalScreen2" "on"
Option "Busmastering" "on"
Option "XFB" "on"
Option "AddARGBGLXVisuals" "on"
Option "Composite" "on"
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: FreeBSD 6.2-STABLE i386
Current Operating System: FreeBSD blackguy.unixtechs.org 6.2-STABLE
FreeBSD 6.2-STABLE #22: Mon Aug 13 23:00:44 EDT 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/BLACKGUY i386
Build Date: 31 August 2007
Eric
* Mel <[EMAIL PROTECTED]> [070908 10:59]:
> Date: Sat, 8 Sep 2007 16:59:32 +0200
> From: Mel <[EMAIL PROTECTED]>
> To: freebsd-questions@freebsd.org
> Subject: Re: nvidia-driver rebooting machine on X startup
>
> On Saturday 08 September 2007 00:43:59 Darren Spruell wrote:
> > On 9/7/07, Mel <[EMAIL PROTECTED]> wrote:
> > > On Friday 07 September 2007 19:43:03 Darren Spruell wrote:
> > > > On 9/6/07, Derek Ragona <[EMAIL PROTECTED]> wrote:
> > > > > At 03:10 PM 9/6/2007, Darren Spruell wrote:
> > > > >
> > > > > Wondering if this is a known issue, or if anyone has suggestions to
> > > > > get it working...?
> > > > >
> > > > > Running FreeBSD 6.2-RELEASE-p4 SMP i386.
> > > > >
> > > > > I installed nvidia-driver-100.14.11 from ports (Sep. 5 snapshot),
> > > > > Linux compatibility enabled. After loading modules 'linux' and
> > > > > 'nvidia', I do:
> > > > >
> > > > > # X -configure
> > > > > # X -config /root/xorg.conf.new
> > > > >
> > > > > At this point the system spontaneously reboots. 'X -configure' runs
> > > > > fine and produces a configuration without issue, but the reboot
> > > > > occcurs when launching X. Nothing is output to screen (it flickers
> > > > > as if starting X), and nothing is written to /var/log/Xorg.0.log. I
> > > > > do get the same behavior if running 'xorgcfg'.
> > > > >
> > > > > Card info:
> > > > >
> > > > > "NV41 [Quadro FX 3450/4000 SDI] rev 162"
> > > > >
> > > > > [EMAIL PROTECTED]:0:0: class=0x030000 card=0x029b10de chip=0x00cd10de
> > > > > rev=0xa2 hdr=0x00
> > > > > vendor = 'NVIDIA Corporation'
> > > > > class = display
> > > > > subclass = VGA
> > > > >
> > > > > I've tried an alternate version of the binary driver
> > > > > (nvidia-driver-96xx) to see if there was any change, and it also
> > > > > reboots on X startup.
> > > > >
> > > > >
> > > > > --
> > > > > Check your AGP settings and consult the readme, chapter 9, for the
> > > > > latest driver. You should be running the latest driver with your
> > > > > card.
> > > > >
> > > > > Make sure you have the correct AGP settings, either letting FreeBSD
> > > > > do it in the kernel or disable the kernel and let the Nvidia driver
> > > > > manage it.
> > > >
> > > > So, I'm not having terrific luck with any combination of settings I
> > > > try.
> > > >
> > > > The latest FreeBSD driver release from Nvidia is the same as the
> > > > version in the ports tree. This is what I've installed.
> > > >
> > > > Attempting the AGPGART route (building the driver with
> > > > "WITH_FREEBSD_AGP=yes" and disabling NvAgp support in xorg.conf) still
> > > > results in a reboot.
> > > >
> > > > Going the NvAGP route (Building without support for AGPGART, setting
> > > > NvAgp to 1 in the xorg.conf, and setting hint.agp.0.disabled=1 in
> > > > /boot/device.hints) also results in a reboot when X starts. One thing
> > > > I notice here; when I specify hint.agp.0.disabled=1, and check the
> > > > output of 'kldstat -v' after booting, I still see several agp drivers
> > > > loaded:
> > > >
> > > > $ kldstat -v |grep -i agp
> > > > 387 pci/agp_ali
> > > > 388 pci/agp_amd
> > > > 389 pci/agp_amd64
> > > > 390 pci/agp_ati
> > > > 391 pci/agp_i810
> > > > 392 pci/agp_intel
> > > > 393 pci/agp_nvidia
> > > > 394 pci/agp_sis
> > > > 395 pci/agp_via
> > > >
> > > > Is this a problem?
> > > >
> > > > I suspect a couple of problems with what I'm doing. Number one,
> > > > there's several knobs to turn (in the driver, in the OS, etc.) and
> > > > it's possible I'm not getting the correct combination. Other thing is,
> > > > I've been told by a technician that this is a PCI Express video card,
> > > > so would AGP even come into play?
> > >
> > > Probably not. I'm seeing the same thing on one machine, no AGP on MB, and
> > > agp kernel modules loaded, but nvidia-driver doesn't care about it.
> > > Let's kill all red herrings:
> > > - Is COMPAT5X in the kernel?
> >
> > COMPAT5X doesn't show up anywhere in /usr/src/; I do have 'options
> > COMPAT_FREEBSD5' defined, though (stock SMP kernel).
> >
> > > - Does running `nvidia-xconfig --query-gpu-info' reboot the system?
> > > - If you do not load the nvidia kernel module, but use Xorg's "nv" driver
> > > does this reboot the system?
> >
> > No, doesn't reboot the system. Output attached below.
> >
> > With the 'nv' driver, X starts fine. I don't use it because I don't
> > have success with the two output displays and xinerama window sizing.
> >
> > nvidia-xconfig --query-gpu-info:
> >
> > Number of GPUs: 1
> >
> > GPU #0:
> > Name : Quadro FX 3450/4000 SDI
> > PCI BusID : PCI:7:0:0
> >
> > Number of Display Devices: 2
> >
> > Display Device 0 (CRT-0):
> > EDID Name : DELL 2001FP
> > Minimum HorizSync : 31.000 kHz
> > Maximum HorizSync : 80.000 kHz
> > Minimum VertRefresh : 56 Hz
> > Maximum VertRefresh : 76 Hz
> > Maximum PixelClock : 162.000 MHz
> > Maximum Width : 1600 pixels
> > Maximum Height : 1200 pixels
> > Preferred Width : 1600 pixels
> > Preferred Height : 1200 pixels
> > Preferred VertRefresh : 60 Hz
> > Physical Width : 410 mm
> > Physical Height : 310 mm
> >
> > Display Device 1 (CRT-1):
> > EDID Name : DELL 2001FP
> > Minimum HorizSync : 31.000 kHz
> > Maximum HorizSync : 80.000 kHz
> > Minimum VertRefresh : 56 Hz
> > Maximum VertRefresh : 76 Hz
> > Maximum PixelClock : 162.000 MHz
> > Maximum Width : 1600 pixels
> > Maximum Height : 1200 pixels
> > Preferred Width : 1600 pixels
> > Preferred Height : 1200 pixels
> > Preferred VertRefresh : 60 Hz
> > Physical Width : 410 mm
> > Physical Height : 310 mm
>
> There's 3 things left I can think of:
> - weird module clash
> - bug in nvidia-driver (I assume you're running Xorg 7.x)
> - driver was not built against running kernel
>
> Using a working Xorg config from a machine with TV-out, I've tried
> compensating for your setup. Please try this xorg.conf:
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> RgbPath "/usr/local/lib/X11/rgb"
> FontPath "/usr/local/lib/X11/fonts/misc/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "extmod"
> Load "type1"
> Load "freetype"
> Load "glx"
> EndSection
>
> Section "ServerFlags"
> Option "Xinerama" "0"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Dell"
> ModelName "2001FP"
> HorizSync 31.0 - 80.0
> VertRefresh 56.0 - 76.0
> Option "DPMS"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor1"
> VendorName "Dell"
> ModelName "2001FP"
> HorizSync 31.0 - 80.0
> VertRefresh 56.0 - 76.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "Quadro FX 3450/4000 SDI"
> Option "NvAgp" "0"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "Quadro FX 3450/4000 SDI"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> Option "TwinView" "1"
> SubSection "Display"
> Depth 24
> Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
>
> --
> Mel
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
=======================================================
Eric I. Ekong [EMAIL PROTECTED]
FreeBSD - The Power to Serve http://www.freebsd.org
K Desktop Environment on FreeBSD http://freebsd.kde.org
Enlightenment E16 and E17 http://www.e.org
=======================================================
Laws of Serendipity:
(1) In order to discover anything, you must be looking for
something.
(2) If you wish to make an improved product, you must already
be engaged in making an inferior one.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
