At 02:08 PM 6/3/2007, Tim Daneliuk wrote:
3) Both the MOBO and drive are SATA-300 rated, but 6.2 insists that
the drive is running at SATA-150. I have verified that the drive
has no jumper forcing it into this mode.
Don't know about the other issues, but I have a Dell with similar
Intel components, and it did the same SATA thing when I put a new
drive in it yesterday:
atapci1: <Intel ICH7 SATA300 controller> port
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf
irq 20 at device 31.2 on pci0
ad4: 76293MB <Maxtor 6L080M0 BACE1G10> at ata2-master SATA150
ad6: 305245MB <Seagate ST3320620AS 3.AAK> at ata3-master SATA150
The ad6 drive is supposed to do SATA-300, but realistically, other
bottlenecks dictate it's not going to get anywhere near the '150
speed, so I'm not terribly worried about it. cp'ing a 4GB file to
/dev/null yielded 57MB/sec.
-RW
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
