I have a 3ware (AMCC) 9500S-4LP RAID card and 4 disks in 2 Mirror 1 arrays: Unit 1: 2 x 80 gigs Unit 2: 2 x 400 gigs
Under windows this was working fine. Both disks where "healthy" and running (I could test this by unplugging one or the other): Under FreeBSD though, it says it's not working: May 7 13:57:37 fire kernel: twa0: INFO: (0x04: 0x000B): Rebuild started: unit=0 May 7 13:57:37 fire kernel: twa0: INFO: (0x04: 0x000B): Rebuild started: unit=1 May 7 13:57:48 fire kernel: twa0: ERROR: (0x04: 0x003A): Drive power on reset detected: port=0 The rebuild message is fine, but keeps getting "Drive power on reset detected: port=0" In the 3ware BIOS, it shows all drives as "active" (ie. powered on and connected), so don't know why the kernel thinks it's powered down? Does it mean something else? If I just "wait" for about 20 minutes, the drives start rebuilding: Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-1 REBUILDING 37 - - 74.4951 OFF OFF u1 RAID-1 REBUILDING 13 - - 372.519 OFF OFF (it's in Unit one above, 37% complete). So even though it's getting this "Drive power on reset detected" it eventually rebuilds it's self. ? Any ideas what this message means? I thought it was an error, but seems fine since it's rebuilding it's self. ? Thanks. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
