On Thu, 12 Apr 2007 21:15:22 -0400 "Dave" <[EMAIL PROTECTED]> wrote:
> Hello, > My thanks to everyone who has helped thus far with this > situation. I've gone over scsi(4) and have added the below to > device.hints: > > hint.sa.0.at="scbus0" > hint.sa.0.target="5" > hint.sa.0.unit="0" > hint.cd.0.at="scbus0" > hint.cd.0.target="0" > hint.cd.0.unit="0" > hint.cd.1.at="scbus0" > hint.cd.1.target="1" > hint.cd.1.unit="0" > > camcontrol devlist shows: > <Quantum DLT4000 D996> at scbus0 target 5 lun 0 > (sa0,pass0) <LITE-ON LTR-48246S SS06> at scbus2 target 0 lun > 0 (cd2,pass1) <LITE-ON DVDRW SOHW-1633S BS0K> at scbus2 target 1 > lun 0 (cd3,pass2) > > I used the wired example, but my device didn't wire. Any suggestions > as to what i missed? > Thanks. > Dave. > Dave I still think you are missing the scsi controller. I used to use a scsi hard drive in one of my computers and here is what I had hint.scbus.0.at="ahc0" #find this with dmesg hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" I do not think you have to do anything with the Cd devices. At least I never did. At this time I have an external hard drive on firewire that I have wired down with the following. ### Wire down external hd to da0### hint.scbus.0.at="sbp0" #find this with dmesg hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" I hope this helps Robert _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
