[EMAIL PROTECTED]:0:0: class=0x020000 card=0x165914e4 chip=0x165914e4 rev= 0x11 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express' class = network subclass = ethernetObviously your device is recognized and a driver has been attached. The name of the device is "bge0" and "ifconfig bge0" should show information about its current configuration.
This is just bizzare. When I wrote my initial e-mail, "ifconfig -a" did not show the bge0 device, nor would "ifconfig bge0" pull up an interface; now the interface shows up with both of those.
The only thing I can think of is that I made nve0, the other interface, a statically configured address instead of one that used DHCP; other than that, I've done nothing that should have effected the Broadcom card.
In any case, I appreciate the e-mail, as I would not have even thought to look again without this prompting. Glad to have the card working!
Alex Kirk _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
