On 1/20/07, Luigi Rizzo <[EMAIL PROTECTED]> wrote:
On Sat, Jan 20, 2007 at 06:05:45PM +0000, Abdullah Al-Marrie wrote: > On 1/20/07, Luigi Rizzo <[EMAIL PROTECTED]> wrote: > > On Sat, Jan 20, 2007 at 07:38:36AM -0500, Tsu-Fan Cheng wrote: > > > under the subsection of display, i have > > > Modes "1024x768" > > > maybe you can try using "1280x800" > > > > in order to get the higher resolutions, you should > > probably install the port > > > > /usr/ports/sysutils/915resolution > > > > which redefines the bios modes. > > In my case (Dell Latitude X1) i run it as > > > > #--- set 1280 resolution on video > > /usr/local/bin/915resolution 5c 1280 768 > > > > you should probably change the 768 to 800 if that's your > > screen height. > > > > cheers > > luigi > > luigi, > > That worked, thank you! > > DELL# /usr/local/bin/915resolution -l > Intel 800/900 Series VBIOS Hack : version 0.5.2 > > Chipset: 945GM > BIOS: TYPE 1 > Mode Table Offset: $C0000 + $269 > Mode Table Entries: 36 > > Mode 30 : 640x480, 8 bits/pixel > Mode 32 : 800x600, 8 bits/pixel > Mode 34 : 1024x768, 8 bits/pixel > Mode 38 : 1280x1024, 8 bits/pixel > Mode 3a : 1600x1200, 8 bits/pixel > Mode 3c : 1920x1440, 8 bits/pixel > Mode 41 : 640x480, 16 bits/pixel > Mode 43 : 800x600, 16 bits/pixel > Mode 45 : 1024x768, 16 bits/pixel > Mode 49 : 1280x1024, 16 bits/pixel > Mode 4b : 1600x1200, 16 bits/pixel > Mode 4d : 1920x1440, 16 bits/pixel > Mode 50 : 640x480, 32 bits/pixel > Mode 52 : 800x600, 32 bits/pixel > Mode 54 : 1024x768, 32 bits/pixel > Mode 58 : 1280x1024, 32 bits/pixel > Mode 5a : 1600x1200, 32 bits/pixel > Mode 5c : 1920x1440, 32 bits/pixel > > > DELL# /usr/local/bin/915resolution 58 1280 1024 > Intel 800/900 Series VBIOS Hack : version 0.5.2 > > Chipset: 945GM > BIOS: TYPE 1 > Mode Table Offset: $C0000 + $269 > Mode Table Entries: 36 > > Patch mode 58 to resolution 1280x1024 complete > > I also set > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 32 > Modes "1280x800" "1024x768" "800x600" > EndSubSection > > But once I rebooted the laptop I lose it, and I have to do it again > after the FreeBSD starts > > Is there a work around for this issue?i put the line /usr/local/bin/915resolution 58 1280 1024 in /usr/local/etc/rc.d/00setvideo.sh so it gets called automatically at startup cheers luigi
That didn't make it, is there another way to do it? will xorg 7.2 going to fix this issue when it's released? -- Regards, -Abdullah Ibn Hamad Al-Marri Arab Portal http://www.WeArab.Net/ _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
