Redmond Militante wrote:
xl1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3D3<rxcsum,txcsum>
inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::206:5bff:fe80:985b%xl1 prefixlen 64 scopeid 0x2=20
ether 00:06:5b:80:98:5b
media: Ethernet autoselect (none)
status: no carrier
^^^^^^^^^^^^^^^^^^
This is your problem.
Do your net card and hub both have link lights?
i
i am hooking the client directly into the internal nic on the gateway, so n=
o hub. i've verified that both nics on the gateway work - did this by conf=
iguring xl1 as the primary nic, and it worked.
You can't do this.
You _must_ use a crossover cable to connect 2 NICs directly together.
You need to use a hub or switch to use straight-through ethernet cables.
.daniel.schrock
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
