Andrea Venturoli wrote:
Jeff Royle wrote:
I've had freezes as you describe on two different servers with ahd
and SMP. The solution was to turn SMP off, unfortunately :(
I don't think I'm ready to turn SMP off just yet.
Are these Xeon's? If so you might want to try disabling Hyper-threading
.. but I'll try disabling Hyper-threating.
And yes they are Xeon's, the Nocona version.
No. In my case one is an Athlon64 and the other an Opteron.
FYI - I have used that particular controller successfully on several
servers recently so I don't think that should be a overall issue for you.
Thank you for your vote of confidence on this. I really think this is a
drive issue or a drive/drive compatibility issue due to the weird
results I'm getting on "camcontrol tags" command. BTW camcontrol
defects shows 0 defects.
In my case the controller is slightly different (29320), but I think the
driver is the problem.
I'm running a 29160 on a 4.9FB (dual Xeon) machine and it has been rock
solid for 1.5years.
It used to work flawlessly as long as I run 5.x, but started freezing as
soon as I upgraded to 6.1.
Notice, however, that I don't have data to support my thesis yet.
bye
av.
Thanks again
Juergen
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
