Hi people. I have one external HD:
umass0: Prolific Technology Inc. Mass Storage Device, rev 2.00/1.00, addr 2 umass0:0:0:-1: Attached to scbus0 (probe0:umass-sim0:0:0:0): error 22 (probe0:umass-sim0:0:0:0): Unretryable Error pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <WDC WD25 00JB-00REA0 20.0> Fixed Direct Access SCSI-0 device pass0: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <WDC WD25 00JB-00REA0 20.0> Fixed Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) Ok i setup the HD with sysinstall and format all the disk to UFS2, this is my entry on /dev crw-r----- 1 root operator 0, 102 Nov 14 16:39 da0 crw-r----- 1 root operator 0, 103 Nov 14 16:39 da0s1 crw-r----- 1 root operator 0, 86 Nov 14 16:39 da0s1c crw-r----- 1 root operator 0, 87 Nov 14 16:39 da0s1d Now which one i need to mount each time i need to use this HD...? I create one mount point, /ext, FreeBSD the first time use /dev/da0s1d, them if i want to mount that one, it send this message: WARNING: /ext was not properly dismounted No metter which one i use, da0s1, da0s1c, da0s1d always send this message, this is normal...? mount /dev/da0s1 /ext mount /dev/da0s1c /ext mount /dev/da0s1d /ext Always: WARNING: /ext was not properly dismounted Any idea about this...? Im using FreeBSD 6.1-p10, my machine has 6 USB ports i have been testing with all and the same message. Thanks all for your time!!! _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
