> What does your ppp.conf look like? For PPPoE, it you should have a line > like this:
[ dang email client ] set device PPPoE:ed1 where ed1 is the network card that is hooked up to your DSL modem. > > -- > Matt > > > > > www# /usr/sbin/ppp > > Working in interactive mode > > Using interface: tun0 > > tun0: Command: default: add default HISADDR > > tun0: Command: default: enable DNS > > tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.0/2 255.255.255 > > 0.0.0.0 > > tun0: Command: default: set authname ****** > > tun0: Command: default: set authkey ****** > > tun0: Command: default: set login > > tun0: Command: default: set dial > > tun0: Command: default: set timeout 0 > > tun0: Command: default: open > > tun0: Phase: bundle: Establish > > tun0: Phase: closed -> opening > > tun0: Phase: PPP started (interactive) > > tun0: Phase: deflink: Connected! > > tun0: Phase: deflink: opening -> dial > > tun0: Chat: deflink: Dial attempt 1 of 1 > > tun0: Phase: deflink: dial -> carrier > > ppp ON www> tun0: Phase: deflink: Disconnected! > > tun0: Phase: deflink: carrier -> hangup > > tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out > > tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Jan 11 > > tun0: Phase: deflink hangup -> closed > > tun0: Phase: bundle: Dead > > > > i imagine that some of this is unnecessary, but it appears that i am not > > even getting to authentication before disconnecting. > > > > thank you > > > > stephen > > > > On Sat, 11 Jan 2003, Matthew Emmerton wrote: > > > > >> attempting to run pppoe on freebsd 4.7 over cable/dsl connection. > > >> > > >> manual says kernel recompilation unnecessary for this release in > > >> order to run pppoe. however, netgraph does not seem to be loading at > boot > > >> time. additionally, pppoe seems unable to get past lcp when connecting. > > >> > > >> how can i tell if netgraph is active after boot? if not, can netgraph > > >> modules be loaded at boot by adding necessary lines into loader.conf? > or > > >> is recompiling kernel a preferred method? > > > > > >If netgraph and pppoe support are not present in your kernel (or not > loaded > > >from modules automatically), the ppp program will complain loudly. > > > > > >Can you post part of your ppp log file so that we can determine if the > lack > > >of pppoe is your problem or if it's something else? > > > > > >-- > > >Matt Emmerton > > > > > > > > > > > >To Unsubscribe: send mail to [EMAIL PROTECTED] > > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
