Howdy. I've been going round and round here trying to simply read a USB thumb drive. I've searched many web sites, read the various messages on this list, the Handbook and other sources, but nothing is very clear to me at the moment. I think I have bits and pieces, but haven't been able to put together the puzzle yet, soooooo ...
So here is a clip of my dmesg text ... Note: I haven't included the whole dmesg output ... if need be, please advise. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:32:43 UTC 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow> real memory = 125763584 (119 MB) avail memory = 113504256 (108 MB) kbd1 at kbdmux0 K6-family MTRR support enabled (2 registers) ACPI disabled by blacklist. Contact your BIOS vendor. cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.1.INTA agp0: <SiS 530 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 atapci0: <SiS 530 UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 0.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown> at device 1.1 (no driver attached) ************************** USB related stuff ************************** ohci0: <SiS 5571 USB controller> mem 0xefffe000-0xefffefff irq 9 at device 1.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ************************** pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) dc0: <Davicom DM9102 10/100BaseTX> port 0xda00-0xda7f mem 0xefffff80-0xefffffff irq 10 at device 11.0 on pci0 miibus0: <MII bus> on dc0 amphy0: <Am79C873 10/100 media interface> on miibus0 amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:30:21:14:b4:4d pci0: <multimedia, audio> at device 12.0 (no driver attached) <snip> I see no references to umass and/or da0 which I have come across in my readings. In the /dev file there are two devices, usb and usb0, so I tried mounting each one of these devices separately, but had no luck. Obviously I'm missing something here, so any reasonably detailed pointers would be appreciated. At the moment I'm not concerned with USB 2.0. LOL! Thanks in advance. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
