Rich Demanowski wrote:
I've searched through and browsed the archives, and can't find anything
that helps me with this.
I've recently gotten my Compaq SR1910NX up and running on FreeBSD 6.1,
but am having trouble getting it to recognize my SwingDrive umass device
(USB 2.0, 512MB). The only thing that's different from this machine's
from-the-factory configuration is the addition of a Linksys WMP55AG
wireless card, which is working just fine thanks to the ath driver.
I know the USB controller is working because both my USB keyboard and my
USB mouse function (though the keyboard (a Happy Hacking Lite 2) is a
little quirky ... when I hold down the shift key to type a word in all
caps, it doubles up the letters LIKEKE THTHIISS sometimes, and I still
haven't gotten Xorg to recognize the scroll wheel on the mouse).
scbus, da, pass, ohci, uhci, ehci, usb, udbp, ugen, uhid, ukbd, ulpt,
umass, ums, ural, urio and uscanner are all enabled in the running
kernel's /usr/src/sys/i386/conf config file. usbd is not running.
When I try to start usbd I get the following:
No USB host controllers found.
There are no usb* devices listed in /dev.
in dmesg I get the following with regard to ohci0 and ehci0:
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at
device 11.0 on pci0
pcib0: unable to route slot 11 INTA
ohci0: Could not allocate irq
device_attach: ohci0 attach returned 6
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff
at device 1 1.1 on pci0
pcib0: unable to route slot 11 INTB
ehci0: Could not allocate irq
device_attach: ehci0 attach returned 6
When I plug the drive into any of the USB ports on the system, nothing
happens in dmesg or /var/log/messages. camcontrol devlist lists no
devices.
I'm a bit confused as to why my USB keyboard and mouse function, but my
thumb drive will not.
Any ideas? Did I miss something in the kernel config? Do I need to
enable something in rc.conf? According to what's in the FreeBSD
handbook, this should be working ...
It's likely that your BIOS has "legacy" support enabled in which case,
as far as FreeBSD is concerned, you actually have a regular keyboard and
mouse. That would explain why the mouse and keyboard work while other
USB items do not. From the messages you gave, it's clear that FreeBSB is
unable to connect to the USB controller. Disabling legacy support in the
BIOS may help. Otherwise check your BIOS for other USB related settings
and try changing those.
HTH,
Micah
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
