Hi
No powerd running and i've never heard of that daemon. It's a pretty
basic noname machine acting as a small scale webserver and a non-public
nameserver. I've asked aroung and nobody can remember how long it's been
like this so it's very possible that it's been acting like this since we
installed it but i highly doubt it because we've had problems with it in
the past and usually when something happens you check top at least once.
It doesn't have much traffic either, if you shutdown the webserver the
traffic is almost none, mostly arp and DNS traffic.
CPU states: 0.0% user, 0.0% nice, 0.0% system, 100% interrupt, 0.0%
idle
Mem: 130M Active, 355M Inact, 108M Wired, 22M Cache, 73M Buf, 5668K Free
Swap: 329M Total, 316K Used, 329M Free
This is what it usually looks like, or here in an iostat view, in case
it helps.
tty ad4 ad6 ast0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 3 28.14 2 0.06 0.57 0 0.00 0.00 0 0.00 0 0 7 83 10
0 227 16.00 1 0.02 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 16.00 11 0.17 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 6.00 1 0.01 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0 50 50
0 76 16.00 2 0.03 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
0 77 0.00 0 0.00 0.00 0 0.00 0.00 0 0.00 0 0 0
100 0
Med vänliga hälsningar
Stefan Midjich aka nocturnal
[Swehack] http://swehack.se
Daan Vreeken [PA4DAN] wrote:
On Monday 03 July 2006 12:26, nocturnal wrote:
Hi
The clock?
interrupt total rate
irq0: clk 25130235 99
irq1: atkbd0 4 0
irq6: fdc0 1 0
irq7: ppc0 1 0
irq8: rtc 288300 1
irq11: atapci1 637852 2
irq12: vr0 uhci0+ 3890833 15
irq13: npx0 1 0
irq14: ata0 54 0
Total 29947281 119
Hmm.. There seems to be nothing wrong with these numbers. If you were
suffering from an interrupt storm I would have expected much larger numbers
in the "rate" column. The column "rate" shows the average number of
interrupts / second. In total your system handles about 120 interrupts /
second, so that shouldn't be a problem.
Are you using "powerd" perhaps? Could it be that your system goes into a too
deep sleep state where interrupt handling costs significantly more time?
grtz,
Daan
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
