On 6/28/2006 7:43 AM Giorgos Keramidas wrote:
On 2006-06-23 14:26, Drew Tomlinson <[EMAIL PROTECTED]> wrote:
If you use NAT, then I can guide you through setting up a local
``master zone'' that is only visible inside your home network, and a
``slave zone'' that pulls stuff from ZoneEdit for the
``mykitchentable.net'' domain. I already have a similar setup at
home, to let my internal systems (workstation, laptop) see each other
with internal names and still use my ISP's name servers for
everything else.
If you don't use NAT, things are going to be much easier, since you
only have to set up the names at ZoneEdit and pull the master zone
from there.
Thank you for your reply.
You're welcome of course :-)
I use NAT for my servers that are visible from the outside so I set
ZoneEdit to return the same address for all servers at
mykitchentable.net which is currently 67.137.238.101.
Excellent! This is exactly what I was hoping the setup would be.
Thus www.mykitchentable.net, drew.mykitchentable.net,
mykitchentable.net, and whatever else. all return 67.137.238.101.
Based up this, it seems that I should leave ZoneEdit alone and set up
a local "master zone" visible only to my private LAN as you describe
above. Being a slave and pulling from ZoneEdit wouldn't have any
benefit as the public address won't equal the private address.
Quite right.
So assuming I understand correctly, yes, please guide me in setting up
a local master zone.
Assuming that your local home network uses addresses in the
192.168.0.0/16 range, you have to set up a local name server which will
recognize and reply for the following zones:
"drew." # "*.drew" are local home network names
192.168.0.* # reverse IP address -> name for home hosts
127.0.0.* # localhost zone (optional)
I use virtual servers with Apache. To access those from the inside, I
have to use the same URL as is used on the outside. So from the
Internet, I need drew.mykitchentable.net to resolve to my public IP but
on the inside, I need it to resolve to 192.168.0.x. Thus it seems to me
that the .drew zone won't work for my setup. Or am I missing something?
Can I set up my server to be authoritative for .mykitchentable.net
instead of .drew but only be visible from the inside? Obviously if it
responded to queries from the Internet, I'd really have a mess. What do
you recommend?
Thanks again for your help!
Drew
[lots of useful step-by-step config info snipped]
--
Be a Great Magician!
Visit The Alchemist's Warehouse
http://www.alchemistswarehouse.com
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
