Ok, aac is in the dmesg.
I can see both 2820sa cards in the dmesg, and I see no errors, etc. -
there are just no drives listed in dmesg.
My setup is 8 500 Gb drives in a single raid-6 array, size ~2.8TB. Any
problems with that ? Perhaps sysinstall cannot deal with a >2TB drive
? There are no other drives in the system besides the single 2.8TB raid 6
array ...
Have you got any other drives you can attach to the raid?
If so, disconnect the 8 drives connected, connect up a couple that are
not part of the raid and configure them as a simple raid 1 and see if
the installers sees that raid. Or try any combination in drives to
bring the raid size down below 2TB (I'm sure this limitation has been
fixed.)
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
