On 5/26/06, Mikhail Goriachev <[EMAIL PROTECTED]> wrote:
Nick Pegg wrote: > On 5/26/06, Nick Pegg <[EMAIL PROTECTED]> wrote: >> I'm having some troubles reading and writing DVD+RW discs. I've >> installed dvd+rw-tools and followed the instructions in the FreeBSD >> Handbook and searched Google without much luck. Here's the specific >> errors I'm getting: >> >> Trying to mount the disc: >> server# mount_cd9660 /dev/cd0 /cdrom >> mount_cd9660: /dev/cd0: Invalid argument >> >> Trying to burn stuff to the disc: >> server# growisofs -Z /dev/cd0 -J -R /root/dumps >> :-( unable to cam_open_pass("/dev/pass0",O_RDWR): Operation not permitted >> >> >> When trying the same operations with a DVD-R disc, I can successfully >> mount and read the disc, however I get the same error when trying to >> write to the disc. The drive can also mount and read CD media just >> fine. I've double-checked the permissions in /dev and I'm running >> everything as root, so that shouldn't be a problem. >> >> Here's some additional info to help in figuring out what my problem >> could be: >> >> server# camcontrol devlist >> <TDK DVDRW0404N 1.0A> at scbus1 target 1 lun 0 (cd0,pass0) >> >> Here's some relevant stuff from dmesg: >> acd0: CDR <CD-ROM! Erive/G6E ! ! ! ! ! ! ! ! ! ! !/M1/31 !> at >> ata1-master UDMA33 >> acd1: DVDR <TDK DVDRW0404N/1.0A> at ata1-slave UDMA33 >> (probe0:ata1:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 >> (probe0:ata1:0:0:0): CAM Status: SCSI Status Error >> (probe0:ata1:0:0:0): SCSI Status: Check Condition >> (probe0:ata1:0:0:0): ILLEGAL REQUEST info?:1000100 csi:0,1,0,1 asc:24,1 >> (probe0:ata1:0:0:0): Reserved ASC/ASCQ pair >> (probe0:ata1:0:0:0): Unretryable error >> cd0 at ata1 bus 0 target 1 lun 0 >> cd0: <TDK DVDRW0404N 1.0A> Removable CD-ROM SCSI-0 device >> cd0: 33.000MB/s transfers >> cd0: Attempt to query device size failed: NOT READY, Medium not present >> g_vfs_done():acd0[READ(offset=65536, length=8192)]error = 5 >> g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5 >> g_vfs_done():cd0[READ(offset=65536, length=8192)]error = 5 >> (cd0:ata1:0:1:0): READ TOC/PMA/ATIP {MMC Proposed}. CDB: 43 0 0 0 0 0 >> 0 0 4 0 >> (cd0:ata1:0:1:0): CAM Status: SCSI Status Error >> (cd0:ata1:0:1:0): SCSI Status: Check Condition >> (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:24,0 >> (cd0:ata1:0:1:0): Invalid field in CDB: Command byte 6 is invalid >> (cd0:ata1:0:1:0): Unretryable error >> g_vfs_done():cd0[READ(offset=32768, length=2048)]error = 5 >> >> >> Thanks for the help! >> >> -Nick >> > > I've got an update to my problem. I can actually read the disc just > fine at securelevel 3, but I need to drop down to securelevel 1 in > order to write to it (/dev/pass0 is a protected device node at > securelevel 2 and 3). > > Is there a workaround to this, or will I have to drop into single-user > mode every time I want to write to a DVD?Hi, I ran into the same problem years ago. This might help you: http://www.freebsd.org/gnome/docs/faq2.html#q15 Cheers, Mikhail.
Looks like that wasn't much help, since the FAQ talks about changing the permissions on the devices. I've done the instructions and only /dev/xpt0 was effected since /dev/cd0 and /dev/pass0 being protected by securelevel 2 and above. Even if I start up in securelevel 1, change the permissions, then go to securelevel 3, I still get the "Operation not permitted" error when trying to use growisofs. -Nick _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
