On 5/10/06, John Cruz <[EMAIL PROTECTED]> wrote:
I Just upgraded my freebsd machine to a new board, this one has an
onboard NIC where as the old one just had a PCI 10/100 nic. I put the
old NIC on the new board as well so I can have 2 running out of the
machine, but I don't know how to set it so that the onboard NIC (vr0) is
the default and the PIC nic (r10) is not, because when I unplug the PCI
one all net connectivity shuts down. Here's my ifconfig and my rc.conf
as always help is much appreciated.
rl0 already is the "default", if by default you mean the nic used when
no nic is specified with command like tcpdump.
This sounds like a routing problem. I am guessing that your default
router is 192.168.42.1. If that is the case the systew will use the
interface "closest" to the router to send packets out, which in this
case is the vr0 interface.
Try `ifconfig vr0 down` instead of unplugging it. Or give rl0 an IP in
the range 192.168.42.2-8.
*********IFCONFIG
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::210:b5ff:fe5f:c324%rl0 prefixlen 64 scopeid 0x1
inet 192.168.42.10 netmask 0xffffff00 broadcast 192.168.42.255
ether 00:10:b5:5f:c3:24
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::250:70ff:fee8:7fe%vr0 prefixlen 64 scopeid 0x2
inet 192.168.42.9 netmask 0xffffff00 broadcast 192.168.42.255
ether 00:50:70:e8:07:fe
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
***********RC.CONF
# -- sysinstall generated deltas -- # Sun Jan 1 19:02:32 2006
# Created: Sun Jan 1 19:02:32 2006
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
hostname="taurus.cruz"
#ifconfig_rl0="DHCP"
inetd_enable="YES"
moused_enable="YES"
moused_flags="-3"
moused_port="/dev/psm0"
moused_type="auto"
nfs_server_enable="YES"
rpcbind_enable="YES"
saver="daemon"
sshd_enable="YES"
usbd_enable="YES"
apache2_enable="YES"
apache_enable="YES"
mysqld_enable="YES"
mysql_enable="YES"
mountd_flags = "-r"
# -- sysinstall generated deltas -- # Sun Jan 15 11:40:28 2006
# The Following specifies that the server is using a static IP address
ifconfig_rl0="inet 192.168.42.10 netmask 255.255.255.0"
ifconfig_vr0="inet 192.168.42.9 netmask 255.255.255.0"
defaultrouter="192.168.42.1"
hostname="taurus.cruz"
# -- sysinstall generated deltas -- # Sun Apr 9 01:33:24 2006
nfs_client_enable="YES"
# -- sysinstall generated deltas -- # Sun Apr 23 21:29:11 2006
font8x8="swiss-8x8"
font8x14="NO"
font8x16="swiss-8x16"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
--
Perfection is just a word I use occasionally with mustard.
--Atom Powers--
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
