On Apr 29, 2006, at 5:02 PM, Andrew Pantyukhin wrote:
Question1: If there is a driver for a device that works on an
Intel Mac
(under OS X), will that driver work under FreeBSD? For example,
suppose
a very new Intel Mac has a new disk controller, is there some
process by
which we can get its driver into FreeBSD? E.g. via a download from
either Apple or the chip set vendor?
Nope, the kernels are not that similar. Porting might be
a short way in many cases, but we don't live in a world
where all drivers/specs are open.
While the kernels are not all that similar there already is Darwin on
Intel, lots of former key FreeBSD talent now works for Apple, and
then without any fanfare MacOS X is found to support several hardware
items which have been near and dear to FreeBSD in the past such as
the Intel Etherexpress Pro NIC. Simply pulled a PCI NIC from my
FreeBSD PC and dropped it right into my G4 PowerMac. Same holds true
for several other commodity NICs.
Mostly the same for a $10 5-port NEC chipset USB2 card. I can wake
from sleep thru the Intel Etherexpress NIC but can not wake from
sleep with the NEC USB2. That's not necessarily a bad thing, in fact
now that I know it, its a feature. Plugged printers into the NEC and
now if the Mac is sleeping and I see the printer is still on I can
turn the printer off without waking the Mac. Previously any activity
on the USB bus would wake the Mac.
--
David Kelly N4HHE, [EMAIL PROTECTED]
========================================================================
Whom computers would destroy, they must first drive mad.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
