1) add or enable (uncommenting) the following lines to your kernel: device atapicam # isn't enable in the default kernel
#SCSI Controllers device cd (cdrecord needs a SCSI cd emulation) 2) recompile the kernel It works on my thinkpad R51. Ciao Vittorio Alle 19:22, sabato 08 aprile 2006, Erin Sharmahd ha scritto: > I've been having some problems getting cdrecord to work on my thinkpad. > > http://www.mathematik.uni-marburg.de/~schmidtm/ibm/index.php says: > "To burn CDs with cdrecord don't forget to enable atapicam during > kernel configuration." > > In his kernel config, he used this with "device atapicd", so I ran: > [amon-re /root] cat /sys/i386/conf/GENERIC | grep atapicd > device atapicd # ATAPI CDROM drives > > In the past (on Linux), I had always used 'cdrecord dev=/dev/cdrom', > so I initially tried 'cdrecord dev=/dev/acd0', but I learned from > 'cdrecord dev=help' that apparently "open via UNIX device" is not > supported. "SCSI Bus scanning" is supposed to be supported, but when > I run 'cdrecord -scanbus', it gives: > [amon-re /root] cdrecord -scanbus > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 > Jörg Schilling > cdrecord: Error 0. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'. > > (it would be nice if cdrecord -scanbus didn't tell me to run it > again... but that's a different issue) > > Here is some (hopefully) relevant information about my system: > > [amon-re /root] uname -a > FreeBSD amon-re 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #1: Sat Feb 11 > 21:55:30 MST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 > > [amon-re /root] sysctl -a | grep -i cd > kern.cam.cd.changer.min_busy_seconds: 5 > kern.cam.cd.changer.max_busy_seconds: 15 > allocdirect 4 1K - 79793 128 > acd_driver 1 2K - 1 2048 > cdev 31 4K - 31 128 > debug.sizeof.cdev: 184 > debug.sizeof.cdev_priv: 216 > dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT > dev.cbb.0.%location: slot=0 function=0 handle=\_SB_.PCI0.PCI1.CDBS > dev.acd.0.%desc: MATSHITADVD-RAM UJ-822S/1.61 > dev.acd.0.%driver: acd > dev.acd.0.%parent: ata1 > > [amon-re /root] dmesg | grep -i cd > acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 > acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.61> at ata1-master UDMA33 > > I'd appreciate any help that anyone can provide. I'm somewhat > stumped, and I'm not seeing much on google regarding this problem. > > Thanks! > ~Erin > > -- > http://www.tuxgirl.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
