Daniel, the only thing i can think of at the moment is go on removing hardware. remove the cd, the slave-hd etc.
i can understand if you are not happy about it, it is your decision. regards, usleep On 4/6/06, Daniel A. <[EMAIL PROTECTED]> wrote: > Hi. > I am trying to get FreeBSD 6.0 running on my desktop machine, but with no > luck. > When I boot in anything but Safe Mode, FreeBSD will hang at boot and > refuse to go further. I've tried to let have a go at it for 30 > minutes, but the boot process didnt get any further. > > When I try to boot the machine normally, it freezes at the following point: > [...] > ad0: 76319MB <Seagate ST380021A 3.19> at ata0-master PIO4 > ad1: 76319MB <Seagate ST380021A 3.19> at ata0-slave PIO4 > acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata1-master PIO4 > ad8: 114473MB <Seagate ST3120022A 3.06> at ata4-master PIO4 > > The ad8 device is attached to my onboard "Promise PDC20376 SATA150 > controller", but even if I disable that device in BIOS, the system > then freezes after displaying: > acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata1-master PIO4 > > Attached is the dmesg.boot I get when the SATA RAID controller is > enabled and I boot in safe mode. > > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
