I am trying to use a Maxtor 3200 300GB external USB drive. When I
connect the drive I get the following message:
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
You'll also see this in the dmseg that follows from when the drive was
plugged in at bootup.
There is nothing wrong with the drive (it works fine plugged into my
laptop running XP).
As per the umass manpage I have usb, ohci, da and scbus enabled in the kernel.
Can anyone give me some pointers as to what the above error might indicate?
Thanks.
dmesg as follows:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Wed Mar 15 23:26:18 CST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/FERGIE
ACPI APIC Table: <RCC GCLE >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 1.80GHz (1794.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 1073676288 (1023 MB)
avail memory = 1041702912 (993 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ACPI-0698: *** Warning: Type override - [DEB_] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [MLIB] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [IO__] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [DATA] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SIO_] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SB__] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ICNT] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ACPI] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [IORG] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SB__] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SIO_] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type
(String) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [BIOS] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [CMOS] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [KBC_] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [OEM_] had invalid type
(Integer) for Scope operator, changed to (Scope)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC GCLE> on motherboard
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq
10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
amr0: <LSILogic MegaRAID 1.53> mem 0xfc5f0000-0xfc5fffff irq 24 at
device 6.0 on pci3
amr0: <LSILogic MegaRAID Express 500> Firmware C170, BIOS 3.13, 32MB RAM
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
0xfebe0000-0xfebeffff irq 16 at device 2.0 on pci4
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:c0:9f:13:4f:ab
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe400-0xe4ff mem
0xfebfe000-0xfebfefff irq 29 at device 3.0 on pci4
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem
0xfebff000-0xfebfffff irq 30 at device 3.1 on pci4
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller (FDE)> port
0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc9800-0xca7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
Timecounters tick every 1.000 msec
acd0: CDROM <FX54++W/U01L> at ata0-master UDMA33
Waiting 5 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 105006MB (215052288 sectors) RAID 5 (optimal)
ses0 at ahc1 bus 0 target 14 lun 0
ses0: <SDR GEM318P 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/amrd0s1a
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
