I've got a bit of an involved question about dsl and router config so hopefully I'm able to make this clear.
The situation I've got is, one dsl router w/ 4 inside ports, 8 routable IPs, 2 outside machines ( FW and Email/Web), and a number of inside machines behind the firewall. Currently I've got one IP for the inside interface of the router and one for each outside machine. DHCP and NAT are turned off on the router, but "BreakWater Firewall" is set to "ClearSailing" and "Safe Harbour" is "On". I couldn't find the setting for the "Safe Harbour" option. Router is Netopia-3000 model 3347NWG. It's currently set to "PPP over Ethernet". Ok, here's my issue, everything works fine from the inside, and machines behind the firewall can access the web server and the Internet, but it looks like the router is blocking all inbound connections. Does the router need to be in "RFC-1483 Bridged Ethernet" mode and have the firewall run PPPoE to sign in to BellSouth? And if this is the answer, will the web server or any other machines (with routable IPs) on the router's inside ports operate as expected? I've looked at the handbook PPPoE info and it seems clear enough and there are a few sites with info on bridging the router, I'm looking for clarification before I start changing the current setup that bridging the router is what I want, that the router is transparent to the Internet, that is allowing all traffic in and out. thanks, John. -- ------------------------------------- John F Hoover [EMAIL PROTECTED] _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
