On Friday 03 March 2006 9:58 pm, David LeCount wrote: > I recently purchased a Tyan S2895 motherboard and more > recently a Hitachi SCSI drive. I'm trying like hell to
I just got my new workstation 2 days ago with the Tyan S2895 motherboard. Mine is the K8WE with the LSI 1030 U320 SCSI adapter built in. To get this to boot 6.0 I had to do the following. In the BIOS: 1. Disable the SLAVE MAC(NIC). Advanced->Integrated Devices->Slave Devices Menu. 2. Disable IEEE 1394(firewire). Advanced->PCI Configuration->Integrated 1394 Menu. With my drive, which was a pull from my old workstation, I had kernel built that did not have the mpt drive for the LSI adapter so during boot I choose option 6 and the issused the command: load mpt boot Then all booted fine. Although you disable the slave nic (my board has 2 nics) the primary still work as long as you load the if_nve kernel module. HTH -- Rod Person http://www.opensourcebeef.net http://blog.opensourcebeef.net _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"