Hello all, Whilew trying to get CD burning working under FreeBSD 6.0 (and 6.1-PreRelease), I keep getting the following error in my dmesg and cd1 is never created. The drive is a Philips CDRW4012P. It shows up as /dev/acd1 and reports correctly in dmesg. However, once atapicam tries to query it, it just repeats the follwoing (output from dmesg with boot -v):
ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> acd0: setting PIO4 on ICH5 chip acd0: setting UDMA33 on ICH5 chip acd1: setting PIO4 on ICH5 chip acd1: setting UDMA33 on ICH5 chip ata1: reinit done .. (probe8:ata1:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe8:ata1:0:1:0): CAM Status: SCSI Status Error (probe8:ata1:0:1:0): SCSI Status: Check Condition (probe8:ata1:0:1:0): ILLEGAL REQUEST asc:20,0 (probe8:ata1:0:1:0): Invalid command operation code (probe8:ata1:0:1:0): (probe8:ata1:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe8:ata1:0:1:0): ILLEGAL REQUEST asc:20,0 (probe8:ata1:0:1:0): Invalid command operation code Unretryable error (probe8:ata1:0:1:0): error 22 (probe8:ata1:0:1:0): Unretryable Error I have looked all over the internet and everywhere says it should have been fixed in 4.7. Any advice on what else to try? Jason _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
