Hi all, (apologies for the long email!)
I've recently made the switch to FBSD 6.0 (FreeBSD 6.0-STABLE #6: Mon
Jan 30 15:08:44 EST 2006) from WinXP on my work laptop, a Toshiba Tecra
A2. Apps work great, but the system feels a bit unstable...too many
(fatal) crashes for my liking. (and hardly any crashes under windows XP
- NOT wanting to start a flame war, but I rather avoid the obligatory
"your hardware is broken" emails ;) )
Anyway, the major crashes seem to be related to power management.
I tried first ACPI enabled (default) including the acpi_toshiba and the
toshctl port. S3 (suspend) worked fine, but on resume the disk subsystem
died on me and after a few seconds it just panic'ed with lots of errors:
g_vfs_done():ad0s1d(write .....)] error 6
g_vfs_done():ad0s1d(write .....)] error 6
g_vfs_done():ad0s1d(write .....)] error 6
g_vfs_done():ad0s1d(write .....)] error 6
(s1d -> /var)
so that was a no goer :( .I have since then upgraded the bios from
version 1.30 to version 1.40 with no changes in the result. The .asl
generated with acpidump have some minor differences between versions.
Is there some part of ACPI I can disable to get this fixed? Is there a
fixed / improved ASL for this laptop?
Also, what is the difference between "ACPI works under Windows because
uses it 'real mode' "... ? ( I think i read it in some docs about acpi)
So I had to fall back onto APM, which is definitely not my fav. option.
Now, apm seems to lock up a lot at random times. Sometimes when coming
back from sleep, sometimes it will come back ok, then I will run my
'wireless_up.sh' (ifconfig iwi0 up; dhclient iwi0 ) and this will lock
up / reset the machine.
The other issue is the crash when doing apm -z from X ( search for my
post "lockup when suspending from X", Jan 30th 06 for details). But I
will give a try to the trick mentioned in a page about IBM laptops
(using vidcontrol to switch to the text vc before zzz).
Not sure if this is anything important or not, but the lock ups seemed
to happen a lot more often when I had loaded (via loader.conf) vesa.ko,
saver_fire.ko and kqemu.ko
attached: DMESG , with acpi disabled (first boot, then a crash - see the
fs-not-clean lines, then the boot with APM)
sysctl acpi-lines when acpi enabled
Kernel Conf.
output of toshctl -a (works fine with APM):
[EMAIL PROTECTED] [Sat Feb 4 01:53:42 2006]
~
$ sudo toshctl -a
bios.date: 1114351200
bios.id: 64767
bios.version: 1.40
hci.cpu_speed: -1
hci.fan: -1
hci.lcd.backlight: 1
hci.lcd.brightness: 4
hci.lcd.mode: 2
hci.lcd.type: 4
hci.power_source: 1
hci.select_bay: 2
hci.software_suspend: 1
---
I am running with apm_enable="yes" and apmd_enable="yes" in rc.conf
--
[EMAIL PROTECTED] [Sat Feb 4 01:55:54 2006]
~
$ cat /boot/loader.conf.local
#bitmap_load="YES"
#splash_bmp_load="YES"
#bitmap_name="/boot/apache_header.bmp"
### MODULES TO LOAD ###
apm_load="YES"
if_iwi_load="YES"
snd_ich_load="YES"
speaker_load="YES"
# need vesa?
#vesa_load="YES"
# QEmu Accelerator
#kqemu_load="YES"
# Need this for XCDRoast
atapicam_load="YES"
hw.ata.atapi_dma="1"
# Java needs this
linprocfs_load="YES"
# ACPI for TOSH - not using ACPI
#acpi_toshiba_load="YES"
### OTHER OPTIONS ###
autoboot_delay="5"
#loader_logo="beastiebw"
---
thanks in advance for any help / advice / suggestions you can provide :)
Beto, wanting to have the rock stable BSD from my servers working better
on this laptop.
acpisem 37 3K - 37 64
acpitask 0 0K - 28 32
acpica 1869 98K - 36311 16,32,64,128,256,512,1024,2048,4096
acpi_perf 1 1K - 1 512
acpidev 74 3K - 74 32
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 0x20041119
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0 C2/1 C3/85
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00%
hw.acpi.battery.life: 78
hw.acpi.battery.time: -1
hw.acpi.battery.state: 2
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.toshiba.force_fan: 0
hw.acpi.toshiba.video_output: 1
hw.acpi.toshiba.lcd_brightness: 4
hw.acpi.toshiba.lcd_backlight: 1
hw.acpi.toshiba.cpu_speed: 4
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 55.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 102.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 102.0C
hw.acpi.thermal.tz0._ACx: 102.0C 102.0C -1 -1 -1 -1 -1 -1 -1 -1
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 983424
dev.acpi.0.%desc: TOSHIB 750
dev.acpi.0.%driver: acpi
dev.acpi.0.%parent: nexus0
dev.pci_link.0.%parent: acpi0
dev.pci_link.1.%parent: acpi0
dev.pci_link.2.%parent: acpi0
dev.pci_link.3.%parent: acpi0
dev.pci_link.4.%parent: acpi0
dev.pci_link.5.%parent: acpi0
dev.pci_link.6.%parent: acpi0
dev.pci_link.7.%parent: acpi0
dev.acpi_sysresource.0.%desc: System Resource
dev.acpi_sysresource.0.%driver: acpi_sysresource
dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_
dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
dev.acpi_sysresource.0.%parent: acpi0
dev.acpi_sysresource.1.%desc: System Resource
dev.acpi_sysresource.1.%driver: acpi_sysresource
dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.FNC0.SYSR
dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0
dev.acpi_sysresource.1.%parent: acpi0
dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
dev.acpi_timer.0.%driver: acpi_timer
dev.acpi_timer.0.%location: unknown
dev.acpi_timer.0.%pnpinfo: unknown
dev.acpi_timer.0.%parent: acpi0
dev.cpu.0.%parent: acpi0
dev.acpi_perf.0.%driver: acpi_perf
dev.acpi_perf.0.%parent: cpu0
dev.pcib.0.%parent: acpi0
dev.acpi_lid.0.%desc: Control Method Lid Switch
dev.acpi_lid.0.%driver: acpi_lid
dev.acpi_lid.0.%location: handle=\_SB_.LID_
dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
dev.acpi_lid.0.%parent: acpi0
dev.acpi_lid.0.wake: 1
dev.battery.0.%parent: acpi0
dev.acpi_button.0.%desc: Power Button
dev.acpi_button.0.%driver: acpi_button
dev.acpi_button.0.%location: handle=\_SB_.PWRB
dev.acpi_button.0.%pnpinfo: _HID=PNP0C0C _UID=0
dev.acpi_button.0.%parent: acpi0
dev.acpi_button.0.wake: 1
dev.acpi_acad.0.%desc: AC Adapter
dev.acpi_acad.0.%driver: acpi_acad
dev.acpi_acad.0.%location: handle=\_SB_.ADP1
dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
dev.acpi_acad.0.%parent: acpi0
dev.acpi_toshiba.0.%desc: Toshiba HCI Extras
dev.acpi_toshiba.0.%driver: acpi_toshiba
dev.acpi_toshiba.0.%location: handle=\_SB_.VALZ
dev.acpi_toshiba.0.%pnpinfo: _HID=TOS6208 _UID=0
dev.acpi_toshiba.0.%parent: acpi0
dev.acpi_tz.0.%desc: Thermal Zone
dev.acpi_tz.0.%driver: acpi_tz
dev.acpi_tz.0.%location: handle=\_TZ_.THRM
dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
dev.acpi_tz.0.%parent: acpi0
dev.atdma.0.%parent: acpi0
dev.atpic.0.%parent: acpi0
dev.attimer.0.%parent: acpi0
dev.attimer.1.%parent: acpi0
dev.speaker.0.%parent: acpi0
dev.npxisa.0.%parent: acpi0
dev.atkbdc.0.%parent: acpi0
dev.psmcpnp.0.%parent: acpi0
dev.sio.0.%parent: acpi0
dev.ppc.0.%parent: acpi0
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #6: Mon Jan 30 15:08:44 EST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AYIIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.50GHz (1496.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1056178176 (1007 MB)
avail memory = 1024593920 (977 MB)
wlan: mac acl policy registered
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xeff8-0xefff mem
0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff irq 10 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f irq 11 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f irq 11 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-0xcfffffff
irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11 at device
5.0 on pci1
iwi0: Ethernet address: 00:0e:35:88:01:90
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f mem
0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:0a:af:27
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem
0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_toshiba0: <Toshiba HCI Extras> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37a,0x778-0x77a irq 7 drq 3 on
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1496276869 Hz quality 800
Timecounters tick every 0.714 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled,
default to deny, logging limited to 100 packets/entry by default
ad0: 57231MB <Seagate ST960822A 3.02> at ata0-master UDMA100
acd0: DVDR <DV-W24E/7.1B> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC DV-W24E 7.1B> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 20 files 7
iwi0: Please load firmware
drmsub1: <Intel i852GM/i855GM GMCH> at device 2.1 on pci0
info: [drm] AGP at 0xd8000000 128MB
info: [drm] Initialized i915 1.2.0 20041217
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 2 2 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Uptime: 4m48s
Shutting down ACPI
Rebooting...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #6: Mon Jan 30 15:08:44 EST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AYIIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.50GHz (1496.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1056178176 (1007 MB)
avail memory = 1024598016 (977 MB)
wlan: mac acl policy registered
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xeff8-0xefff mem
0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 10 at device 2.0 on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xcfe0-0xcfff irq 10 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xcf80-0xcf9f irq 11 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xcf60-0xcf7f irq 11 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xcffffc00-0xcfffffff
irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xcfeff000-0xcfefffff irq 11 at device
5.0 on pci1
iwi0: Ethernet address: 00:0e:35:88:01:90
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xcf00-0xcf3f mem
0xcfefe000-0xcfefefff irq 11 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0e:7b:0a:af:27
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 11 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbe00-0xbeff,0xbdc0-0xbdff mem
0xcfdffe00-0xcfdfffff,0xcfdffd00-0xcfdffdff irq 11 at device 31.5 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 0.714 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled,
default to deny, logging limited to 100 packets/entry by default
ad0: 57231MB <Seagate ST960822A 3.02> at ata0-master UDMA100
acd0: DVDR <DV-W24E/7.1B> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC DV-W24E 7.1B> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
iwi0: Please load firmware
drmsub1: <Intel i852GM/i855GM GMCH> at device 2.1 on pci0
info: [drm] AGP at 0xd8000000 128MB
info: [drm] Initialized i915 1.2.0 20041217
iwi0: link state changed to UP
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 error=4<ABORTED>
pid 70710 (firefox-bin), uid 1001: exited on signal 11 (core dumped)
pid 64731 (conftest), uid 0: exited on signal 12 (core dumped)
# AYIIN - Beto's laptop - Kernel config
# BASED ON
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.5 2006/01/23 14:19:36 marius
Exp $
machine i386
cpu I586_CPU
cpu I686_CPU
ident AYIIN
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
## As as 2006/01/30, IPSEC is still under GIANT - Disabling until i actually
need it.
#options IPSEC #IP security
#options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
device crypto
# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
# carried in TCP option 19. This option is commonly used to protect
# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
# This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
# This requires the use of 'device crypto', 'options FAST_IPSEC' or 'options
# IPSEC', and 'device cryptodev'.
#options TCP_SIGNATURE #include support for RFC 2385
device cryptodev
options NETGRAPH # netgraph(4) system
# altq(9). Enable the base part of the hooks with the ALTQ option.
# Individual disciplines must be built into the base system and can not be
# loaded as modules at this point.
options ALTQ
options ALTQ_CBQ # Class Bases Queueing
options ALTQ_RED # Random Early Detection
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler
options ALTQ_CDNR # Traffic conditioner
options ALTQ_PRIQ # Priority Queueing
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_FORWARD #packet destination changes
#options IPFIREWALL_FORWARD_EXTENDED #all packet dest changes
options IPDIVERT #divert sockets
options IPSTEALTH #support for stealth forwarding
options DUMMYNET
options ZERO_COPY_SOCKETS
# SMB/CIFS requester
# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
# options.
# NETSMBCRYPTO enables support for encrypted passwords.
options NETSMB #SMB/CIFS requester
options NETSMBCRYPTO #encrypted password support for SMB
# Kernel side iconv library
options LIBICONV
options LIBMCHAIN
options QUOTA
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_DIRHASH # Improve performance on big directories
# Extended attributes allow additional data to be associated with files,
# and is used for ACLs, Capabilities, and MAC labels.
# See src/sys/ufs/ufs/README.extattr for more information.
options UFS_EXTATTR
options UFS_EXTATTR_AUTOSTART
# Access Control List support for UFS filesystems. The current ACL
# implementation requires extended attribute support, UFS_EXTATTR,
# for the underlying filesystem.
# See src/sys/ufs/ufs/README.acls for more information.
options UFS_ACL
options QUOTA
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_ELI # Disk encryption.
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
#####################################################################
# SYSV IPC KERNEL PARAMETERS
#
# Maximum number of entries in a semaphore map.
#options SEMMAP=31
# Maximum number of System V semaphores that can be used on the system at
# one time.
#options SEMMNI=11
# Total number of semaphores system wide
#options SEMMNS=61
# Total number of undo structures in system
#options SEMMNU=31
# Maximum number of System V semaphores that can be used by a single process
# at one time.
#options SEMMSL=61
# Maximum number of operations that can be outstanding on a single System V
# semaphore at one time.
#options SEMOPM=101
# Maximum number of undo operations that can be outstanding on a single
# System V semaphore at one time.
#options SEMUME=11
# Maximum number of shared memory pages system wide.
#options SHMALL=1025
# Maximum size, in bytes, of a single System V shared memory region.
#options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
#options SHMMAXPGS=1025
# Minimum size, in bytes, of a single System V shared memory region.
#options SHMMIN=2
# Maximum number of shared memory regions that can be used on the system
# at one time.
#options SHMMNI=33
# Maximum number of System V shared memory regions that can be attached to
# a single process at one time.
#options SHMSEG=9
############################################################
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options DEVICE_POLLING
options HZ=1400
######################################################################
device apic # I/O APIC
# Bus support.
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
device cd # CD
device pass # Passthrough device (direct SCSI access)
options ATA_STATIC_ID # Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
options SC_PIXEL_MODE
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
# Wireless NIC cards
device wlan #802.11 support
device wlan_wep #802.11 WEP support
device wlan_ccmp #802.11 CCMP support
device wlan_tkip #802.11 TKIP support
device wlan_xauth #802.11 external authenticator support
device wlan_acl #802.11 MAC ACL support
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device disc #Discard device (ds0, ds1, etc)
device gre #IP over IP tunneling
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device scbus # SCSI bus (required for SCSI)
device da # Direct Access (disks)
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
