Leonidas Tsampros wrote:
On Thu, Jan 05, 2006 at 04:05:23PM +0100, Frank Staals wrote:
Leonidas Tsampros wrote:
On Thu, Jan 05, 2006 at 01:46:40PM +0100, Frank Staals wrote:
Hey,
I have an Acer Aspire 1356 LCi laptop with a CD-RW/DVD-drive in it so I
can burn cds and read DVD's and cd's. But when I tried to burn and mount
a datadisk this happend:
[EMAIL PROTECTED] mkisofs -o tmp1.iso VirtualDub-1.6.11.zip totaal.wmv
24.61% done, estimate finish Thu Jan 5 13:37:10 2006
49.25% done, estimate finish Thu Jan 5 13:37:10 2006
73.82% done, estimate finish Thu Jan 5 13:37:10 2006
98.49% done, estimate finish Thu Jan 5 13:37:10 2006
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 8724
20320 extents written (39 MB)
[EMAIL PROTECTED]
[EMAIL PROTECTED] burncd -f /dev/acd0 -s 12 data tmp1.iso fixate
next writeable LBA 0
writing from file tmp1.iso size 40640 KB
written this track 40640 KB (100%) total 40640 KB
fixating CD, please wait..
[EMAIL PROTECTED] mount_cd9660 -v /dev/acd0 /mnt/dvd/
could not determine starting sector, using very first session
mount_cd9660: /dev/acd0: Input/output error
[EMAIL PROTECTED]
I'm using a Philips CD-RW which I cleaned before use with:
[EMAIL PROTECTED] burncd -f /dev/acd0 erase
erasing CD - 99 % done
I tried searching what I could do about it, but I couldn't realy find
something usefull. It seems that something goes wrong with burning the
CD I guess ( looking at the output when trying to mount it ) but I'm not
sure what I do wrong. Everything worked fine up until today. I hope
someone can point out what I can do about it.
Thanks in advance,
The overall process seems to ended quite succesfully. Just try to
eject the cd before mounting the fresh cd that you burned. I had
similar issues very recently and this was the solution for me.
If you are bored to death, try these:
# burncd -f /dev/acd0 (blabla)
(wait to finish)
# cdcontrol -f /dev/acd0 eject
# cdcontrol -f /dev/acd0 close
# mount_cd9660 -v /dev/acd0 /mnt/dvd
Hmm I got a little bit further indeed, but it still won't mount
<burned the cd>
[EMAIL PROTECTED] cdcontrol -f /dev/acd0 eject
<manually pushed the cd-drive back ( since it is a laptop ) >
[EMAIL PROTECTED] mount_cd9660 -v /dev/acd0 /mnt/dvd/
using starting sector 0
mount_cd9660: /dev/acd0: Input/output error
[EMAIL PROTECTED]
Have you checked dmesg for any useful messages ? If there are any, post
them in case they shed some light on your scenario.
Oh good-one I looked over it since portupgrade was running. When I do a :
[EMAIL PROTECTED] mount_cd9660 -v /dev/acd0 /mnt/dvd/
using starting sector 0
mount_cd9660: /dev/acd0: Input/output error
this is in dmesg:
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 error=0
g_vfs_done():acd0[READ(offset=32768, length=2048)]error = 5
--
-Frank Staals
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
