Roland, Thanks for your help, but...
> You should verify that /usr/local/etc/sane.d/dll.conf has the line > niash It does. I removed the addition you suggested earlier. > You cut put a line like usb /dev/uscanner0 > in /usr/local/etc/sane.d/niash.conf I did (had to create the file). > The most simple solution would be to have the following in > /etc/devfs.rules: > [devrules=10] > add path 'uscanner*' mode 0666 > You'll also have to activate the ruleset 'devrules' by putting the > following line in /etc/rc.conf: > devfs_system_ruleset="devrules" I did (had to create devfs.rules). Then I rebooted, plugged the scanner in and got this: uscanner0: vendor 0x03f0 product 0x045, rev 1.00/0.00, addr 2 uscanner0: setting config no failed device_attach: uscanner0 attach returned 6 uhub0: port 2, set config at addr 2 failed uhub0: device problem (STALLED), disabling port 2 Which is almost identical to the boot-errors I had before (the first line is slightly different). Needless to say SANE still can't find the device. What can I say? 'Helaas'? - Jay _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
