I am sure there is an easy solution to this but here
is my problem, and it is driving me nuts.
The error message on boot is "Non-system disk or disk
error". I only get this message if I do a warm reboot
with no power off. If I halt the system and power off
and restart it boots right up.
Computer is a Compaq AP500 (P-II 450mhz, 700MB Ram,
Adaptec SCSI card). The system has two SCSI drives,
"C:" which is at ID 1 and "D:" which is at ID 2. The
OS is FreeBDS 5.4, standard installation using the
FreeBSD-only boot manager (I also tried the alternate
FreeBSD boot choice). No other OSs reside on the
machine and I have tried to start with a clean DOS
Fdisked bachine before installing FreeBSD. The PC
does not have the Compaq bios partition installed but
that does not seem to matter. I have not been able to
upgrade the ROM BIOS on this machine, but the Compaq
Diagnostics and Setup programs seem to work and report
the right information about the disks. I even tried
disabling floppy and CD media boot but that dodn't
help either.
Thanks, Portie
__________________________________
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
